Dynamic debonding in concrete beams strengthened with composite materials
نویسندگان
چکیده
منابع مشابه
Numerical Simulation of Debonding Failure of Reinforced Concrete Beams Strengthened with Externally Bonded Frp
As the life age of the existing structures are required to meet the changing demands on civil infrastructures. So strengthening and retrofitting are required. Recently many techniques to strengthen the reinforced concrete beams in flexural by using fiber reinforced polymer (FRP) had appeared. The most famous technique among them is strengthening the (RC) beams with externally bonded FRP sheet t...
متن کاملDebonding-Related Strain Limits for Externally Bonded FRP Sheets in Flexurally Strengthened Reinforced Concrete Beams
Debonding problems of externally bonded fiber reinforced polymer (FRP) sheets in flexurally FRP-strengthened reinforced concrete (RC) beams have been a concern and a research challenge since their application of this strengthening technique. Intermediate crack induced debonding is the most common failure mode which is that the debonding initiates at the critical flexural-shear or flexural crack...
متن کاملFinite Element Modelling of Steel-concrete Composite Beams Strengthened with Prestressed Cfrp Plate
This paper presents results from Finite Element Modelling (FEM) of steel-concrete composite beams strengthened with prestressed Carbon Fibre Reinforced Polymer (CFRP) plate. For the purpose of this study, three beams were strengthened using prestressed CFRP plate with three different levels of induced prestressing force. The models were developed using ANSYS FE package. The results of an experi...
متن کاملFatigue and Overloading Behavior of Steel-Concrete Composite Flexural Members Strengthened with High Modulus CFRP Materials
Due to corrosion and the continuous demand to increase traffic loads, there is a need for an effective system which can be used to repair and/or strengthen steel bridges and structures. This paper describes an experimental program, recently completed, to investigate the fundamental behavior of steel-concrete composite scaled bridge beams strengthened with new high modulus carbon fiber reinforce...
متن کاملStrut Deformation in CFRP-Strengthened Reinforced Concrete Deep Beams
Strut-and-tie model (STM) method evolved as one of the most useful designs for shear critical structures and discontinuity regions (D-regions). It provides widespread applications in the design of deep beams as recommended by many codes. The estimation of bottle-shaped strut dimensions, as a main constituent of STM, is essential in design calculations. The application of carbon fibre reinforced...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Solids and Structures
سال: 2012
ISSN: 0020-7683
DOI: 10.1016/j.ijsolstr.2012.07.025