Dynamic fracture model for acoustic emission
نویسندگان
چکیده
منابع مشابه
Acoustic Emission on Human Femur Tissue Fracture
This study describes the acoustic emission (AE) activity during fracture of human femur tissue under flexural load. The sample is fixed as a cantilever and two AE broadband sensors are placed in different points of the sample, one near the fixing end and the other near the head, where a pin load is applied. The aim is to investigate if AE procedures and indices well established in engineering m...
متن کاملFracture of Human Femur Tissue Monitored by Acoustic Emission Sensors
The study describes the acoustic emission (AE) activity during human femur tissue fracture. The specimens were fractured in a bending-torsion loading pattern with concurrent monitoring by two AE sensors. The number of recorded signals correlates well with the applied load providing the onset of micro-fracture at approximately one sixth of the maximum load. Furthermore, waveform frequency conten...
متن کاملAcoustic emission during fracture of ceramic superconducting materials
In the ceramic materials acoustic emission (AE) is associated with a rapid elastic energy release due to the formation and expansion of cracks, which causes generation and propagation of the elastic wave. AE pulses measurement allows monitoring of internal stresses changes and the development of macroand micro-cracks in ceramic materials, and that in turn allows us to evaluate the time to failu...
متن کاملFracture Dynamic Propagation Model of High-Energy Gas Fracturing for Casing Perforated Well
The onshore oil and natural gas industries of China have started a large-scale development when crude oil reserves have been difficult to recover. The stratum fracture modification is an indispensable measure to efficiently develop oil and gas fields. Hydraulic fracturing is the most important reservoir stimulation technique, but it is still faced with various problems such as the failure to fr...
متن کاملOn the Use of Acoustic Emission and Digital Image Correlation for Welded Joints Damage Characterization
A series of tests have been conducted to investigate fatigue damage characterization in corroded welded steel plates using structural health monitoring (SHM) techniques. Acoustic Emission (AE) is a non-destructive testing (NDT) technique with potential applications for locating and monitoring fatigue cracks in service. In the present work, AE is implemented to characterize damage during crack e...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The European Physical Journal B - Condensed Matter
سال: 2003
ISSN: 1434-6028,1434-6036
DOI: 10.1140/epjb/e2003-00336-7