منابع مشابه
Dynamic Modeling of Magnetorheological Damper Behaviors
Based on theoretical analysis and experiments, this article proposes a new model for a magnetorheological (MR) damper. The proposed model with a smooth and concise form can interpret the bi-viscous and hysteretic behaviors of the MR damper very well. The parameters in the model have definite physical meanings. The bi-viscous and hysteretic behaviors can be characterized by two parameters 0 and ...
متن کاملDynamic Modeling of Underplateform Damper used in Turbomachinery
The present work deals with the structural analysis of turbine blades and modeling of turbine blades. A common failure mode for turbine machines is high cycle of fatigue of compressor and turbine blades due to high dynamic stresses caused by blade vibration and resonance within the operation range of the machinery. In this work, proper damping system will be analyzed to reduce the vibrating bla...
متن کاملVISCOUS NUTATION DAMPER, MODELING AND ANALYSIS
In some aerospace vehicles, the tracking sensors which act in a tracking loop as stabilizer are mounted on a two degree of freedom gyro. The gyro must align its rotor axis with the line of sight in order to remove tracking errors. The tracking precision and sensitivity are functions of the gyros performance. One of the main factors in reducing the precision and producing instabilities is nutati...
متن کاملdiagnostic and developmental potentials of dynamic assessment for writing skill
این پایان نامه بدنبال بررسی کاربرد ارزیابی مستمر در یک محیط یادگیری زبان دوم از طریق طرح چهار سوال تحقیق زیر بود: (1) درک توانایی های فراگیران زمانیکه که از طریق برآورد عملکرد مستقل آنها امکان پذیر نباشد اما در طول جلسات ارزیابی مستمر مشخص شوند; (2) امکان تقویت توانایی های فراگیران از طریق ارزیابی مستمر; (3) سودمندی ارزیابی مستمر در هدایت آموزش فردی به سمتی که به منطقه ی تقریبی رشد افراد حساس ا...
15 صفحه اولDynamic Modeling and Stability Analysis of Articulated Frame Steer Vehicles
The stability analysis of articulated frame steer vehicle models is presented. To reveal the relationship between the “oversteer” and “jack-knife” motion modes based on a 2 degree of freedom (DOF) and 3 DOF vehicle models, respectively, the results derived from these models are investigated and compared. To identify the effects of design variables on the lateral stability of the vehicle, a more...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOSR Journal of Engineering
سال: 2014
ISSN: 2278-8719,2250-3021
DOI: 10.9790/3021-04452233