Dynamic Phenomena in Laser Cutting and Process Performance
نویسندگان
چکیده
منابع مشابه
Experimental Study of the Effect of Laser-Cutting Process Parameters on Heat Distribution and Cutting Edge Quality of Steel Sheets
This study aimed to evaluate Laser-cutting process of Mild Steel St37 sheets with two different thicknesses. In order to evaluate the quality of cutting edge and the depth of the area affected by the heat, several tests were conducted to determine the effect of parameters such as Laser power, Laser beam movement speed and pressure of axillary gas on the quality of cutting edge and the depth of ...
متن کاملInvestigation of Physical Phenomena and Cutting Efficiency for Laser Cutting on Anode for Li-Ion Batteries
Lithium-ion batteries have a higher energy density than other secondary batteries. Among the lithium-ion battery manufacturing process, electrode cutting is one of the most important processes since poor cut quality leads to performance degradation, separator protrusion, and local electric stress concentration. This may, eventually, lead to malfunction of lithium-ion batteries or explosion. The...
متن کاملStriation Formation and Melt Removal in the Laser Cutting Process
Introduction The formatIOn of periodIC patterns (stnatlOn) has drawn much attentIon In contInUOUS wave laser cutt time (s) tp time penod per oxidation cycle (s) U gas velOCIty profile (m/s) Uo streamwlse gas velOCIty (m/s) V Interfacial velOCIty (m/s) u lIqUId velOCIty In x dIrectIOn (m/s) v hqUId velOCIty In y dIrectIOn or cuttIng speed (m1s) v. fnctIon velOCIty (m/s) W actIvatIOn energy (J) W...
متن کاملNumerical Simulation of Oxidation Effects in the Laser Cutting Process
A numerical model is developed for the process of oxygenassisted laser cutting of mild steel. Coupled oxygen concentration and energy balance equations are solved by a controlvolume-based computational scheme, while the velocity field is obtained by analytical boundary theory. The enthalpy method is adopted to trace the free boundary of the phase change and thus determine the molten-layer thick...
متن کاملEvaluation of Disc Cutter Performance in Rock Cutting Process Using 3D Finite Element Method
Today, numerical simulation can be used as a suitable tool to measure large quantities that are very expensive and, in some cases, impossible to measure. One of the important issues in predicting rock mass boreability in excavation with full face tunnel boring machines is estimating the discchr('39')s forces for rock cutting. For this purpose, the linear cutting test is employed. However, limi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Physics Procedia
سال: 2012
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2012.10.028