Dynamic Properties of High Damping Alloys
نویسندگان
چکیده
منابع مشابه
Identification of Dynamic Damping Properties of a Flexible Structural Adhesive
In this paper dynamic damping properties of a nominated flexible structural adhesive have been identified using an extended-direct modal based joint identification method. It has been revealed that damping characteristics of adhesive are correlated to both frequency and mode shape. Young’s and shear moduli increase with frequency but damping on the other hand, decrease. The results showed that ...
متن کاملDamping Properties of Shape Memory Alloys During Phase Transformation
A high damping capacity is considered as one of the important functional properties of shape memory alloys. Those properties are related to a thermoelastic martensitic transformation. As a consequence of this transformation, the internal friction or damping can be investigated for three different states: 1. during thermal transformation cycling, 2. during martensite induced strain cycling at co...
متن کاملDynamic Fracture Properties of Titanium Alloys
Fatigue precracked specimens of three titanium alloys (6Al-4V, ELI, and Timetal 5111) were dynamically loaded in a drop weight tower system while the dynamic fracture toughness was inferred using Coherent Gradient Sensing, crack opening displacement, or strain gage methods. A comparison of the initiation toughness of the three materials as a function of loading rate and specimen thickness is made.
متن کاملPhysical Properties of High Entropy Alloys
The majority of studies on high-entropy alloys are focused on their phase, microstructure, and mechanical properties. However, the physical properties of these materials are also encouraging. This paper provides a brief overview of the physical properties of high-entropy alloys. Emphasis is laid on magnetic, electrical, and thermal properties.
متن کاملINVESTIGATING THE PHYSICAL AND MECHANICAL PROPERTIES OF HIGH-COPPER AND SILVER DENTAL-FILLING AMALGAM ALLOYS
Abstract: The aim of the present investigation is to study the physical and mechanical characteristics of dental-filling spherical high-copper and silver amalgams and to compare them with a common high-copper domestic unicompositional amalgam. In this study, cylindrical specimens were mechanically condensed according to the ISO 1559:1986 Standard in order to measure the compressive strength, Vi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 1981
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.47.748