Dynamic recrystallization and adiabatic shear localization
نویسندگان
چکیده
منابع مشابه
Dynamic recrystallization as a potential cause for adiabatic shear failure.
Dynamic recrystallization (DRX) is almost universally observed in the microstructure of adiabatic shear bands. It is usually admitted that DRX results from the large temperatures that develop in the band along with very high local strains. This paper reports the observation of dynamically recrystallized nanograins in Ti6Al4V alloy specimens that were impact loaded to only half the failure strai...
متن کاملAdiabatic shear failure and dynamic stored energy of cold work.
Dynamic testing of statically predeformed specimens of magnesium (AM50) shows that the failure strain increases with the level of prestrain. Interrupted and other dynamic tests show that the temperature rise prior to localization has only a minor influence on adiabatic shear band (ASB) formation. For all the tests, the dynamic deformation energy until ASB formation is found to be relatively con...
متن کاملOn criteria for dynamic adiabatic shear band propagation
In this work, we postulate the physical criterion for dynamic shear band propagation, and based on this assumption, we implement a numerical algorithm and a computation criterion to simulate initiation and propagation of dynamic adiabatic shear bands (ASBs). The physical criterion is based on the hypothesis that material inside the shear band region undergoes a dynamic recrystallization process...
متن کاملDynamic Shear Band Propagation and Micro-structure of Adiabatic Shear Band
Meshfree Galerkin approximations in both two and three dimensions have been used in simulations of dynamic shear band propagation in an asymmetrically impact-loaded prenotched plate. Failure mode switching and failure mode transitions, which have been reported experimentally, are replicated in numerical computations. For intermediate impact speed (25 m=s < V 6 30 m=s), the numerical results sho...
متن کاملDynamics of Adiabatic Shear
The formation of adiabatic shear bands is examined with an approximate analytic model. The shear band is viewed as a propagating feature with a well-defined front. The shear band is further partition into a shear-band process zone within which most of the adiabatic heating and shear stress relaxation occurs, followed by a quasisteady zone within which little dissipation occurs. Although a one-d...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mechanics of Materials
سال: 2015
ISSN: 0167-6636
DOI: 10.1016/j.mechmat.2014.10.001