Dynamic Relaxation Method for Load Capacity Analysis of Reinforced Concrete Elements
نویسندگان
چکیده
منابع مشابه
Pullout Load Analysis of Reinforced Concrete Anchor Shafts
In this paper, results obtained in both conventional and finite element analysis of straight and belled anchor shafts subjected to a pullout force are presented. In numerical analysis, it is assumed that no drainage takes place during the anchor pullout. Comparisons between two conventional methods of analysis for ultimate pullout load and the results obtained by the finite element analysis are...
متن کاملCalibration of Load and Resistance Factors for Reinforced Concrete
Current approach for designing of reinforced concrete members is based on the load and resistance factor. However the load and resistance parameters are random variables, the constant values have been designated for them in the designing procedure. Assuming these factors as the constants, will be led to the unsafe and uneconomical designs. Safe designing of structures requires appropriate recog...
متن کاملFinite Element Analysis of Reinforced Concrete Column Under Lateral Load
To serve its purpose a structure must be safe against collapse and serviceable in use. Serviceability requires that deflections be adequately small to keep the cracks within tolerable limits. Although the widely followed ACI Code suggests a detailed method of deflection calculation, it often cannot exactly perceive the actual behavior of a structure. For this purpose, finite element analysis, u...
متن کاملDevelopment of Shear Capacity Equations for Rectangular Reinforced Concrete Beams
The problem of shear is not yet fully understood due to involvement of number of parameters. Designers are extra careful about shear, especially in beams and consequently higher safety factors are used in shear design. Several equations are available in literature to determine the shear capacity of beams, i.e. ACI equation, Zsutty equation and KIM & White equation. To verify the application of ...
متن کاملdynamic soil – structure interaction analysis of concrete structures by using finite elements method
in practice, foundations are settled on the soft layers of soil, so the ground must be designed as well as the structure. wave propagation and hysteresis damping of soil layers may alter the seismic response of flexible-base design in comparison to controversial fixed-base. lots of uncertainties about this issue, necessitate most of seismic design standards including iranian standard no. 2800 t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Sciences
سال: 2018
ISSN: 2076-3417
DOI: 10.3390/app8030396