Dynamic Rheological Properties of Polypropylene/Polyamide-6 Blends Modified with a Maleated Thermoplastic Elastomer

Fracture Toughness of Blends of Nylon 6 with Maleated Elastomers

The Effects of Thermoplastic Polyurethane on the Structure and Mechanical Properties of Modified Polypropylene Blends

In this study, a melt-compounding process was used to produce ordinary polypropylene (PP)/thermoplastic polyurethane (TPU) blends and modified impact-resistant polypropylene (MPP)/TPU blends. The influences of TPU on the blending morphology, melting behavior, crystallization behavior, and mechanical properties of these blends were investigated. Differential scanning calorimetry results show tha...

Thermal and Morphological Properties of Thermoplastic Elastomer Nanocomposites Based on PA6/NBR

Rheological properties of modified Bitumen: Comparison of waste polymers’ performance

In this investigation, rheological properties of three different polymer-modified bitumen compounds containing recycled polyethylene terephthalate (R-PET), crumb rubber (CR) and poly (styrene-butadiene-styrene) (SBS) are evaluated and compared. The modified samples were tested by a dynamic shear rheometer (DSR) where complex modulus (G*), phase angle (δ) and rutting resistance (G*/Sinδ) of spec...

Rheological Properties and Chemical Bonding of Asphalt Modified with Nanosilica

The objective of this study is to evaluate the rheological properties and chemical bonding of nano-modified asphalt binders blended with nanosilica. In this study, the nanosilica was added to the control asphalt at contents of 4% and 6% based on the weight of asphalt binders. Superpave binder and mixture tests were utilized in this study to estimate the characteristics of the nano-modifed aspha...