Dynamic Stability of Cylindrical Shells Under Step Loading
نویسندگان
چکیده
منابع مشابه
Dynamic buckling of thin cylindrical shells under axial impact
The dynamic buckling of thin isotropic thermoviscoplastic cylindrical shells compressed with a uniform axial velocity prescribed at the end faces is investigated analytically and numerically. In the first part of the paper, the stressed/deformed state of a shell is assumed to have buckled if infinitesimal perturbations superimposed upon it grow. Cubic algebraic equations are derived for both th...
متن کاملStudy on buckling of steel cylindrical shells with an elliptical cutout under combined loading
In this paper, simulation and analysis of thin steel cylindrical shells with elliptical cutouts under oblique loading were studied using finite element method. First, the numerical results were validated by the results of experimental test performed by an INSTRON 8802 servo hydraulic machine. Also, the effect of cutout angle (θ), cutout size, cutout position (L0/L) and cutout aspect ratios (b/a...
متن کاملStability Analysis of Laminated Cylindrical Shells under Combined Axial Compression and Non-Uniform External Pressure
This study investigates geometrical non-linear analysis of composite circular cylindrical shells under external pressure over part of their surfaces and also shells subjected to combined axial compression and triangular external pressure. Donnell non-linear shell theory along with first order shear deformation theory (FOSD) are adopted in the analysis. In the case of combined axial compression ...
متن کاملOptimization of Cylindrical Shells Under Combined Loading Against Brittle Creep Rupture
Optimal structural design of cylindrical shells under overall bending, torsion, tension and internal pressure in creep conditions is considered. The material is assumed to be governed by the Norton-Odqvist nonlinear steady creep law. Minimal weight of the shell is the design objective, radius and wall thickness are design variables, and the constraint refers to brittle creep rupture as describe...
متن کاملFracture response of externally flawed aluminum cylindrical shells under internal gaseous detonation loading
Abstract. Experiments were performed to observe the fracture behavior of thinwall and initially-flawed aluminum tubes to internal gaseous detonation loading. The load can be characterized as a propagating pressure jump with speed of 2.4 km/s and magnitude ranging from 2 to 6 MPa, followed by an expansion wave. Flaws were machined as external axial surface notches. Cracks ran both in the upstrea...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Applied Mechanics
سال: 1975
ISSN: 0021-8936,1528-9036
DOI: 10.1115/1.3423514