Dynamic Stress Intensity Factor Analysis of Interface Crack Using Line-Spring Model.
نویسندگان
چکیده
منابع مشابه
Accurate Determination of Stress Intensity Factor for Interface Crack by Finite Element Method
This paper presents the simple method to determine the complex stress intensity factor of interface crack problem by the finite element method. The proportional method is extended to the interface crack problem. In the present method, the stress values at the crack tip calculated by FEM are used and the stress intensity factors of interface crack are evaluated from the ratio of stress values be...
متن کاملStress Intensity Factor of Radial Cracks for Rotating Disks and Cylinders using Average Stress Method
This article utilizes the average stress method to obtain the stress intensity factor of rotating solid and hollow disks/cylinders containing a radial crack. It is assumed that the cracks are located radially at center, internal or external radius of the geometry. Results are shown for both of the plane stress and plane strain assumptions and are validated against the known data introduce...
متن کاملStress Analysis at a Bi-Material Interface Crack-tip
The optical methods of Caustics, Photoelasticity and Isopachics for the evaluation of the stress intensity factors and the distribution of the principal stresses at a bi-material interface crack-tip, were proposed. The caustics, isochromatic and isopachic fringes are developed from the stress field which results from a stress function X(r, ). When the crack-tip, which is perpendicular to interf...
متن کاملCement-Implant Interface Fracture Failure by Crack Initiation Due to Interface Cavity Stress Concentration
Nowadays total joint replacements are widely used in the world, so in average 800,000 joint surgeries are done yearly only in Europe and North America. However implant loosening is and remains as the major issue of all implant failures and therefore causes revision surgery procedures. Studies and experiments have identified poor fixation of implants most likely is the main cause of long term im...
متن کاملFatigue Analysis of Crack Growing Rate and Stress Intensity Factor for Stress Corrosion Cracking in a Pipeline System
Environment-assisted cracking (EAC) is one of the most serious causes of structural failure over a broad range of industrial applications including offshore structures. In EAC condition there is not a definite relation such as Paris equation in Linear Elastic Fracture Mechanics (LEFM). According to studying and searching a lot what the researchers said either a material has contact with hydroge...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 1995
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.61.2578