Dynamic tensile tests on ferritic and austenitic steels with improved testing and measuring technique
نویسندگان
چکیده
منابع مشابه
Dynamic tensile tests on ferritic and austenitic steels with improved testing and measuring technique
For analysing dynamically loaded structures by means of the finite element method a dynamic constitutive material model is necessary to obtain reliable results. For this purpose dynamic tensile tests were performed with the fine grained steel 20MnMoNi 5 5 (A508 CI. 3) and the austenitic steel X6CrNi 18 11'at different velocities. Smooth round bar specimens of different geometries were used. Dis...
متن کاملThe High Temperature Tensile Properties of Ferritic-martensitic and Austenitic Steels after Irradiation in an 800 Mev Proton Beam
This study examines the effect of tensile test temperatures ranging from 50°C to 600°C on the tensile properties of a modified 9Cr-1Mo ferritic steel (T91) and a 316L stainless steel (SS) after high energy proton irradiation at about 35°C-67°C. After 1-3 dpa, the proton-irradiated T91 steel was tensile tested at temperatures from 50°C to 600°C. It was observed that the yield strength and ultima...
متن کاملTensile Tests on Stainless Steels in Temperature Range
In real conditions, austenitic stainless steels solidify in non equilibrium and a two phases microstructure of austenite and ferrite is formed 1 . The aim of this work was to investigate the behaviour of both phases at tensile testing, especially to find out an eventual difference in the relaxation of the deformation energy and the effect of the two phases microstructure in workability. To achi...
متن کاملHigh heat flux testing of 12–14Cr ODS ferritic steels
0022-3115/$ see front matter 2009 Published by doi:10.1016/j.jnucmat.2009.09.022 * Corresponding author. E-mail address: [email protected] (Z. Oksiut The thermal performance of Fe–(12–14)Cr–2W–0.3Ti–0.3Y2O3 ODS reduced activation ferritic steels, which are considered as candidate first wall materials for the future fusion power reactors and were manufactured by mechanical alloying in hydr...
متن کاملHydrogen-Induced Delayed Cracking in TRIP-Aided Lean-Alloyed Ferritic-Austenitic Stainless Steels
Susceptibility of three lean-alloyed ferritic-austenitic stainless steels to hydrogen-induced delayed cracking was examined, concentrating on internal hydrogen contained in the materials after production operations. The aim was to study the role of strain-induced austenite to martensite transformation in the delayed cracking susceptibility. According to the conducted deep drawing tests and cons...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Le Journal de Physique IV
سال: 1994
ISSN: 1155-4339
DOI: 10.1051/jp4:1994822