Dynamical simulation of a nonlinear stepper motor system
نویسندگان
چکیده
منابع مشابه
Stepper Motor Model for Dynamic Simulation
The modeling and simulation of the electromechanical behaviour of stepper motors are of high interest because they are often used for space application. A commercially available multibody dynamic simulation software, which sets up the equations of motion and the transfer function of the motor and solves them numerically, was used. The results show, that both the dynamic simulation software and ...
متن کاملNonlinear Adaptive Control of a Permanent Magnet Stepper Motor
This paper considers adaptive position control of a permanent magnet (PM) stepper motor using exact linearization via static state-feedback. Physical outputs are chosen in such a way that the resulting closed-loop system is linearized and decoupled. The objective of the adaptive controller for a PM stepper motor is to achieve output tracking between the motor outputs and prescribed reference si...
متن کاملStepper Motor Actuated Microvalve
We present the design, fabrication and characterization of a novel microvalve realized by combining micro and fine machining techniques. The design is for high flow rates at high pressure difference between inlet and outlet, burst pressure of up to 15 bars, there is no power consumption required for the valve to maintain its position during operation in any intermediate state and the process ga...
متن کاملDevelopment of a spherical stepper wrist motor
This paper presents the design concept of a new spherical stepper robotic wrist motor capable of three degrees of freedom (DOF) motion in a single joint. The spherical wrist motor has significant potential applications where the demands on wrist torque and workspace are low but high speed manipulation of end-effector orientation is required continuously in all directions. Typical applications a...
متن کاملThe L297 Stepper Motor Controller
November 2003 The L297 Stepper Motor Controller is primarily intended for use with an L298N or L293E bridge driver in stepper motor driving applications. It receives control signals from the system’s controller, usually a microcomputer chip, and provides all the necessary drive signals for the power stage. Additionally, it includes two PWM chopper circuits to regulate the current in the motor w...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Dynamics and Control
سال: 2014
ISSN: 2195-268X,2195-2698
DOI: 10.1007/s40435-014-0093-6