Dynamics of martensitic structure at TiNb-based quenched alloys under heating and loading
نویسندگان
چکیده
منابع مشابه
Martensitic Transformation in Microcrystalline Melt-Quenched Fe-Ni Alloys
The features of martensite transformation in Fe (31 32)% Ni melt-quenched alloys are considered. The meltquenching was realized by spinning technique with variable parameters. The influence of the melt-quenching on structural and kinetics transformation parameters is revealed. In particular Ms point is shown to decrease but volume percentage of athermal martensite is found to be invariable with...
متن کاملPhase Transitions During Continuous Heating of Martensitic CuAlMn Alloys
Phase transitions in CuAlMn alloys containing up to 12 at% Mn and 27 at% A1 continuously heated up to 5500C were studied using differential scanning calorimetry and transmission electron microscopy. Alloys containing less than 4.8 at% Mn exhibit an exothermal heat effect in the range 280 380°C due to y2 precipitation. The additional endothermal peak above 5000C is caused by DO3 disordering. All...
متن کاملMartensitic Transformation Under Loading and the Mechanical Properties of Iron Alloys
The ma~tensitic transfol-niation (MT) under tensile dcfol.m:ltion at 77K i n a series of FeNi-Mn alloys was studied. The anlotult of ~na~tensite fos~ned d ~ ~ r i ~ l g the tensile test depends on the applied stress and on the Mn content which determines the mnrtensitic point and the MT start stress. Elongation of the tensile tested samples has a maximum value in the alloys co~ltainilig the 50%...
متن کاملThe Interpretation of Structure Functions in Quenched Binary Alloys
We study the segregation process in quenched binary alloys by analyzing and comparing the time evolution of the structure function and of the grain distribution obtained from computer simulations on a model system. We tind good agreement between cluster sizes and densities determined directly on the computer sample and ones obtained by the Guinier method from the structure function. We then des...
متن کاملStructure fragmentation in Fe-based alloys by means of cyclic martensitic transformations of different types
The effect of martensite transformations of different types on the misorientation of austenite crystalline lattice, which characterizes the degree of structure fragmentation, was investigated for Fe-Ni and Fe-Mn alloys. As a result of multiple face-centered cubic (f.c.c.)-body-centered cubic (b.c.c.)-f.c.c. transformations, an austenite single-crystalline specimen is transformed in a polycrysta...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2013
ISSN: 1742-6596
DOI: 10.1088/1742-6596/438/1/012020