Early Strength Development Properties of Concrete using Early Strength Improvement Type Cement

Improvement of Early Strength of Cement Mortar Containing Granulated Blast Furnace Slag Using Industrial Byproducts

In the field of construction, securing the early strength of concrete (on the first and third days of aging) has been an important problem in deciding the mold release time (i.e., shortening the construction time period). Therefore, the problem of reduced compressive strength in the early aging stage caused by mixing granulated blast furnace slag (GBFS) with concrete must certainly be resolved....

Evaluation of Early-Age Concrete Compressive Strength with Ultrasonic Sensors

Surface wave velocity measurement of concrete using ultrasonic sensors requires testing on only one side of a member. Thus, it is applicable to concrete cast inside a form and is often used to detect flaws and evaluate the compressive strength of hardened concrete. Predicting the in situ concrete strength at a very early stage inside the form helps with determining the appropriate form removal ...

Prediction of 28-day Compressive Strength of Concrete from Early Strength and Accelerated Curing Parameters

Abstract-Predicting 28-day compressive strength of concrete is an important research task for many years. In this study, concrete specimens were cured in two phases, initially at room temperature for a maximum of 30 h and later at a higher temperature for accelerated curing for a maximum of 3 h. Using the early strength obtained after the two-phase curing and the curing parameters, regression e...

Strength development in concrete with wood ash blended cement and use of soft computing models to predict strength parameters

In this study, Wood Ash (WA) prepared from the uncontrolled burning of the saw dust is evaluated for its suitability as partial cement replacement in conventional concrete. The saw dust has been acquired from a wood polishing unit. The physical, chemical and mineralogical characteristics of WA is presented and analyzed. The strength parameters (compressive strength, split tensile strength and f...

Development of High-strength Self-consolidating Concrete