Economics of Machining : Optimal Product Mix and Optimal Machining Conditions
نویسندگان
چکیده
منابع مشابه
The Optimal Locus Approach With Machining Applications
An optimal locus concept is introduced as the basis for an optimization methodology for real-time control subject to time-varying constraints. The optimal locus in the control plane contains all possible optimum points, and the actual point is found at the intersection of the optimal locus with the most limiting constraint. The mathematical basis of the approach is a given set of equations whic...
متن کاملOptimal grids for five-axis machining
This paper presents a new grid generation method for tool path planning for five-axis machining based on minimization of the kinematics error. First, the procedure constructs a space-filling curve so that the scallops between the resulting tracks of the tool do not exceed a prescribed tolerance. At the second stage (which is the subject of this paper) a one-dimensional grid along the space-fill...
متن کاملOptimal contour orientations for machining of free{form surfaces
In contour machining of free{form surfaces with a ball{end cutter, the tool contacts the surface along loci that correspond to sections by a set of parallel planes, with equidistant spacing and common normal N. For a given tool radius, the greatest scallop height between successive tool paths is suppressed by choosing an orientation for the contouring planes that will maximize, over the entire ...
متن کاملEstimation of optimal machining control parameters using artificial bee colony
Modern machining processes such as abrasive waterjet (AWJ) are widely used in manufacturing industries nowadays. Optimizing the machining control parameters are essential in order to provide a better quality and economics machining. It was reported by previous researches that artificial bee colony (ABC) algorithm has less computation time requirement and offered optimal solution due to its exce...
متن کاملEnvironmental considerations on the optimal product mix
Several types of regulations limit the amount of different emissions that a firm may create from its production processes. Depending on the emission, these regulations could include threshold values, penalties and taxes, and/or emission allowances that can be traded. However, many firms try to comply with these regulations without a systematic plan, often leading not only to emission violations...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Japan Society of Mechanical Engineers
سال: 1973
ISSN: 0029-0270,2185-9485
DOI: 10.1299/kikai1938.39.2899