Eddy current detection of short cracks in sheets
نویسندگان
چکیده
منابع مشابه
Eddy Current Testing and Sizing of Fatigue Cracks
This study proposes an investment for the evaluation of fatigue cracks by eddy current testing (ECT). Fatigue cracks (FC) manufactured on SUS316 plates are detected using ECT. Inverse analysis is applied to the ECT signals and both crack depth and length are estimated. Two models are applied, one is the EDM model without conductivity, and the other is the SCC model with partial conductivity. Th...
متن کاملDetection of cracks in metal sheets using pulsed laser generated ultrasound and EMAT detection.
A pulsed Nd:YAG laser with an approximately Gaussian beam shape is directed onto the surface of an aluminium sheet at an energy density below which damage by laser ablation occurs, generating Lamb waves in the sheet. The laser beam is raster scanned across the surface of the sample. The Lamb waves travel radially outwards from the generation point and are detected some distance away by an elect...
متن کاملRadial cracks in perforated thin sheets.
When a rigid cone is slowly pushed through a thin elastic sheet, the material breaks, exhibiting a network of cracks expanding in the radial direction. Experiments conducted with aluminum sheets show that the number of cracks is selected at the beginning of the perforation process and then remains stable. A simple model predicts the number of cracks as the result of a competition between the el...
متن کاملDetection and Imaging of Internal Cracks by Tangential Magnetic Field Component Analysis using Low-Frequency Eddy Current Testing
Abstract. Eddy current testing using a pickup coil is usually applied to the surface detection of cracks because of its high frequency. However, for metal infrastructure, detection of not only the surface but also internal cracks is desired. Therefore, we have developed a low-frequency eddy current testing system to inspect interior structures using a magneto-resistive (MR) sensor with a wide m...
متن کاملBorescope and Eddy Current Dual Probe for In Situ Detecting Cracks in an Aeroengine Labyrinth Disc
Cracks often arise in an aeroengine labyrinth disc, which endanger flight security. Non-destructive testing (NDT) must been carried out in the labyrinth disc during the aeroengine working time. In situ detecting cracks in the labyrinth disc, the probe need pass through three layers narrow holes of aircraft skin, engine shell and outlet duct. Ultrasonic, radiography and liquid penetrant inspecti...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: NDT International
سال: 1990
ISSN: 0308-9126
DOI: 10.1016/0308-9126(90)90889-v