Eddy current speed sensor with magnetic shielding
نویسندگان
چکیده
منابع مشابه
Eddy-current Testing with Gmr Magnetic Sensor Arrays
The advent of GMR magnetic sensors and GMR sensor arrays with frequencyindependent sensitivity offers improvements in speed, depth, and resolution in eddy-current testing. Arrays of GMR magnetic sensors allow rapid scanning of an area for defects in a single pass. The small size and low power consumption of these solid-state magnetic sensors enable the fabrication of compact arrays of sensors o...
متن کاملCoreless Hall Effect Based Current Sensing Technique with Magnetic Shielding
In this modern era, most of the equipment is electrostatic type. But still, in measuring current, we use conservative type. So, we developed a Modified coreless Hall Effect based current sensing method with magnetic shielding. The coreless Hall Effect based measurement method uses hall sensors without iron core. Hall sensors are firmly fixed on the insulated current carrying conductor. The magn...
متن کاملA magnetic current sensor with SQUID readout
A cryogenic magnetic current sensor has been constructed and tested for operation and sensitivity in the ac regime. The sensor is based on a ferromagnetic-core current transformer, coupled to a superconducting-quantum-interferencedevice (SQUID) current detector. The SQUID electronics provides a voltage output that can be coupled to room temperature signal recovery electronics, such as a lock-in...
متن کاملA Wide Linear Range Eddy Current Displacement Sensor Equipped with Dual-Coil Probe Applied in the Magnetic Suspension Flywheel
The Eddy Current Displacement Sensor (ECDS) is widely used in the Magnetic Suspension Flywheel (MSFW) to measure the tiny clearance between the rotor and the magnetic bearings. The linear range of the ECDS is determined by the diameter of its probe coil. Wide clearances must be measured in some new MSFWs recently designed for the different space missions, but the coil diameter is limited by som...
متن کاملAn Ink-Jet Printed Eddy Current Position Sensor
An eddy current sensor with an ink-jet printed flexible inductor has been designed and fabricated. The inductor has been designed by means of software developed in-house. It has been fabricated by ink-jet printing with silver ink on a flexible substrate. The inductor is a part of the oscillator circuit whose oscillating frequency is measured by a microcontroller. The sensor characteristics have...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Magnetism and Magnetic Materials
سال: 2020
ISSN: 0304-8853
DOI: 10.1016/j.jmmm.2020.166568