EFFECT NICKEL AND QUENCH-TEMPER PROCESS ON MECHANICAL AND CORROSION PROPERTIES OF ASTM A588 WAETHERING STEEL
نویسندگان
چکیده
The mechanical improvement and "self-protection" properties are mainly needed to develop weather-resistant steel materials. In this study, A588 was given thermomechanical treatment (hot-rolling) followed by a quench-tempering process. is modified adding 1, 2, 3 wt% nickel the primary alloy. Steel made using hot rolling process at 750 ℃ for 1 hour with 70% thickness reduction. sample heat-treated 850 quenched in water, oil, open air. tempering conducted 400 30 minutes. Metallography test confirmed final microstructural compared CCT simulation result. fast cooling (water oil quenchant) produces tempered martensite, ferrite, pearlite, while air-cooled forms ferrite-pearlite. rate significantly affects strength hardness addition on hardness, both factors have no significant ductility. owns highest tensile value (~1226 MPa) %Ni, ductility (around 17.1–27.43%) obtained air cooling. With 3% Ni, corrosion decreases 0072 mpy -432.5 mV potential 0.12µA/cm-2 current density.
منابع مشابه
determination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولEffect of nitriding temperature on the nanostructure and corrosion properties of Nickel coated 304 stainless steel
Nickel films of 150 nm thickness were deposited on 304 stainless steel and post annealed under flow of nitrogen at different temperatures. The prepared samples were corrosion tested in 1.0 M H2SO4 solution using potentiodynamic polarization technique. Crystallographic and morphological structure of the samples were analysed by X-ray diffraction XRD and atomic force microscopy AFM respectively b...
متن کاملeffect of seed priming and irrigation regimes on yield,yield components and quality of safflowers cultivars
این مطالعه در سال 1386-87 در آزمایشگاه و مزرعه پژوهشی دانشگاه صنعتی اصفهان به منظور تعیین مناسب ترین تیمار بذری و ارزیابی اثر پرایمینگ بر روی سه رقم گلرنگ تحت سه رژیم آبیاری انجام گرفت. برخی از مطالعات اثرات سودمند پرایمینگ بذر را بر روی گیاهان مختلف بررسی کرده اند اما در حال حاضر اطلاعات کمی در مورد خصوصیات مربوط به جوانه زنی، مراحل نموی، عملکرد و خصوصیات کمی و کیفی بذور تیمار شده ژنوتیپ های م...
Effect of annealing process on microstructure and mechanical properties of high manganese austenitic TWIP steel
In the present study, the influence of annealing temperature on mechanical properties and the microstructure of a high manganese austenitic steel (Fe-30Mn-4Al-4Si-0.5C) was investigated. X-ray diffractometry, optical and scanning electron microscopy, hardness and tensile tests were used to analyze the relationship between mechanical properties and microstructure after annealing process. The res...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metalurgi
سال: 2022
ISSN: ['2443-3926']
DOI: https://doi.org/10.14203/metalurgi.v37i3.630