Effect of abrasive waterjet parameters on rock removal
نویسندگان
چکیده
منابع مشابه
Modeling and Optimization of Abrasive Waterjet Parameters using Regression Analysis
Abrasive waterjet is a novel machining process capable of processing wide range of hard-to-machine materials. This research addresses modeling and optimization of the process parameters for this machining technique. To model the process a set of experimental data has been used to evaluate the effects of various parameter settings in cutting 6063-T6 aluminum alloy. The process variables consider...
متن کاملExperimentation on Piercing with Abrasive Waterjet
Abrasive waterjet cutting (AWJ) is a highly efficient method for cutting almost any type of material. When holes shall be cut the waterjet first needs to pierce the material.This paper presents a vast experimental analysis of piercing parameters effect on piercing time. Results from experimentation on feed rates, work piece thicknesses, abrasive flow rates, standoff distances and water pressure...
متن کاملAbrasive Waterjet Peening with Elastic Prestress: Effect of Boundary Conditions
Abrasive Waterjet Peening (AWJP) has emerged as a potential surface treatment process for metal implants and prosthetic devices. An elastic tensile prestress has been shown to increase the magnitude and depth of residual stress that can be obtained. In the present investigation, the subsurface residual stress fields resulting from AWJ peening of Ti6Al4V with load control and displacement contro...
متن کاملLow Pressure Abrasive Waterjet Use for Precision Drilling and Cutting of Rock
Construction of a second theater underground at the Gateway Arch in St. Louis required a quiet, non-intrusive means of rock removal, capable of cutting the vertical walls of the theater down to a depth of 4.5 meters, within a vertical accuracy of 2.5 cm. A low pressure (35 MPa) abrasive laden waterjet was developed for this; and, also modified as an abrasive waterjet drill to emplace 25 mm diam...
متن کاملSurface Texture in Abrasive Waterjet Cutting
When cutting thick material with an abrasive wateriet, the surface area can be characterized by two texture types. At the top of the cut, the surface texture is smooth. At the bottom, the slurry jet exiting the workpiece forms large striations in the surface. An investigation was conducted to experimentafly determine the influence of the abrasive waterjet cutting parameters on surface texture. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Korean Tunnelling and Underground Space Association
سال: 2012
ISSN: 2233-8292
DOI: 10.9711/ktaj.2012.14.4.421