Effect of Addition of Ti and B on Mn-Si, Mn-Si-Cr and Mn-Si-Mo Steels
نویسندگان
چکیده
منابع مشابه
ULTRA FINE FERRITE FORMATION IN Si-Mn TRIP STEELS
Abstract: In the present investigation, the effects of thermomechanical processing parameters and the steel chemical composition on the ultra fine ferrite formation characteristics were studied. This was programmed relying on the capabilities of strain induced transformation (SIT) phenomenon and applying to different grades of Si-Mn TRIP (Transformation Induced Plasticity) steels. According...
متن کاملTHE EFFECT OF STRAINING BEFORE AND DURING AUSTENITE TO FERRITE TRANSFORMATION ON THE FINAL CHARACTERISTICS OF SI-MN TRIP STEELS
TRIP (TRansformation- lnduced- Plasticity) behavior is a powerful mechanism to improve mechanical properties. The basis of TRIP phenomena is the transformation of retained austenite with optimum characteristics (volume fraction, stability, size and morphology) to martensite during deformation at room temperature. Accordingly, the first requirement to obtain desired TRIP effects is to produce an...
متن کاملThe Effect of Mn-Depleted Surface Layer on the Corrosion Resistance of Shape Memory Fe-Mn-Si-Cr Alloys
In this work, we have examined Fe-Mn-Si-Cr alloys possessing a good shape memory effect due to a high Mn content (28 wt pct). The addition of Cr (5 wt pct) was made in order to give fairly good corrosion resistance to the alloy. But we have verified that even in moderately corrosive environments, the presence of chromium does not bear any passivation. On the other hand, we have found that the a...
متن کاملStructure of Self-Assembled Mn Atom Chains on Si(001).
Mn has been found to self-assemble into atomic chains running perpendicular to the surface dimer reconstruction on Si(001). They differ from other atomic chains by a striking asymmetric appearance in filled state scanning tunneling microscopy (STM) images. This has prompted complicated structural models involving up to three Mn atoms per chain unit. Combining STM, atomic force microscopy, and d...
متن کاملThe Determination of the Activities in Mn-C and Mn-Si Melts
The activities of manganese in Mn-C and Mn-Si melts at 1673K have been determined. The transportation method was applied to the vapor pressure measurement. The activities of manganese in the Mn-C melts as referred to pure liquid manganese showed the positive deviation from ideality at less than 0.17 atomic fraction of carbon and deviated negatively above this value. The activities of manganese ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1963
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.49.2_149