Effect of bimodal powder blends on part density and melt pool fluctuation in laser powder bed fusion

Measurement of the Melt Pool Length during Single Scan Tracks in a Commercial Laser Powder Bed Fusion Process

Contact author: [email protected] Certain commercial equipment, instruments, or materials are identified in this paper in order to specify the experimental procedure adequately. Such identification is not intended to imply recommendation or endorsement by the National Institute of Standards and Technology, nor is it intended to imply that the materials or equipment identified are necessari...

The Effect of Powder Recycling in Direct Metal Laser Deposition on Powder and Manufactured Part Characteristics

A potential way of improving the material efficiency and cost effectiveness of the Direct Metal Laser Deposition (DMLD) process is to take powder that is not utilised in each deposition attempt and re-use it in subsequent attempts (powder recycling). Currently, this is not widely implemented for fear of a detrimental effect on part quality. This study examines how powder recycling, using simple...

Effects of powder recycling on stainless steel powder and built material properties in metal powder bed fusion processes

Some aspects on designing for metal Powder Bed Fusion

Additive Manufacturing (AM) using the Powder Bed Fusion (PBF) is a relatively new manufacturing method that is capable of creating shapes that was previously practically impossible to manufacture. Many think it will revolutionize how manufacturing will be done in the future. This thesis is about some aspects of when and how to Design for Additive Manufacturing (DfAM) when using the PBF method i...

Predictive Simulation of Process Windows for Powder Bed Fusion Additive Manufacturing: Influence of the Powder Bulk Density

The resulting properties of parts fabricated by powder bed fusion additive manufacturing processes are determined by their porosity, local composition, and microstructure. The objective of this work is to examine the influence of the stochastic powder bed on the process window for dense parts by means of numerical simulation. The investigations demonstrate the unique capability of simulating ma...