Effect of Electrostatic Charged State on Die-Wall Lubrication for Powder Metallurgy.
نویسندگان
چکیده
منابع مشابه
Benefits of Die Wall Lubrication for Powder Compaction
The achievement of high density at reasonable cost would be a definite advantage for the production of P/M components requiring high static and dynamic properties. The use of the electrostatic die wall lubrication technique appears as a very attractive route to promote densification. By reducing the level of friction at die walls, this technique should have the potential to also reduce density ...
متن کاملAccelerated Threshold Fatigue Crack Growth Effect – Powder Metallurgy Aluminum Alloy
Fatigue crack growth (FCG) research conducted in the near threshold regime has identified a room temperature creep crack growth damage mechanism for a fine grain powder metallurgy (PM) aluminum alloy (8009). At very low ∆K, an abrupt acceleration in room temperature FCG rate occurs at high stress ratio (R = Kmin/Kmax). The near threshold accelerated FCG rates are exacerbated by increased levels...
متن کاملThe effect of wall strengtheners on the performance of double-stage electrostatic precipitators
The presence of wall strengtheners in double-stage electrostatic precipitators affects gas velocity, electrical field and particle movement over the ESP. In this work we have used our previous mathematical model for double-stage ESP {Talaie et. al (2001) [10]] to study the effect of wall strengtheners on the performance of double-stage ESP. One of the important findings was that, due to the fac...
متن کاملeffect of oral presentation on development of l2 learners grammar
this experimental study has been conducted to test the effect of oral presentation on the development of l2 learners grammar. but this oral presentation is not merely a deductive instruction of grammatical points, in this presentation two hypotheses of krashen (input and low filter hypotheses), stevicks viewpoints on grammar explanation and correction and widdowsons opinion on limited use of l1...
15 صفحه اولMultiprobe impedance measurement system for nondestructive evaluation and test of "green state" powder metallurgy parts
This paper describes an instrument capable of detecting flaws in "green-state" (prior to sintering) powder metallurgy (P/M) parts. The instrument uses a matrix of impedance measurements from a multiprobe array which contacts the surface of the P/M part. The array of measured data is processed to not only detect the presence of flaws, but also determine their location, size, and orientation. Exp...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 2016
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.63.93