Effect of extrusion ratios on hardness, microstructure, and crystal texture anisotropy in pure niobium tubes subjected to hydrostatic extrusion
نویسندگان
چکیده
منابع مشابه
EFFECT OF FINISH ROLLING TEMPERATURE ON MICROSTRUCTURE,TEXTURE AND PLANAR ANISOTROPY IN ALUMINUM ALLOY AA3004 SHEETS
AA3004 alloy is widely used in can making. The major concern in the production of canbodies is earing, which develop by high planar anisotropy of rolled sheet. Balance ofrecrystallisation and rolling textures together with a uniform and fine grain microstructure canminimize the earing. The effects of finish rolling temperature (FRT) on planar anisotropy,microstructure, texture development and m...
متن کاملEvolution of Texture and Grain Size during Equal Channel Angular Extrusion of Pure Copper and 6012 Aluminum
Among different SPD techniques, Equal channel Angular Pressing has attracted the most attentions, because of applying large strain to solid bulk materials. In this research, ECAP process up to 6 passes was carried out on a pure copper and a 6012 Al-Mg-Si alloy with BC route in ECAP dies with Φ=120 and Ψ=20 and diameter of 20and 10 millimeter respectively. Moreover, X-ray diffraction (XRD) syste...
متن کاملEvolution of Texture and Grain Size during Equal Channel Angular Extrusion of Pure Copper and 6012 Aluminum
Among different SPD techniques, Equal channel Angular Pressing has attracted the most attentions, because of applying large strain to solid bulk materials. In this research, ECAP process up to 6 passes was carried out on a pure copper and a 6012 Al-Mg-Si alloy with BC route in ECAP dies with Φ=120 and Ψ=20 and diameter of 20and 10 millimeter respectively. Moreover, X-ray diffraction (XRD) syste...
متن کاملNiobium-Titanium Superconducting Wires: Nanostructures by Extrusion and Wire Drawing
Nano-fabrication is not new to the manufacturers of superconducting wires, in fact the dominant commercial superconductor, Nb-Ti, relies on a mechanically induced nano-structure for its remarkable properties. In this paper we show how these wires are manufactured so that their microstructure achieves the same scale as the superconducting vortex spacing. Recent attention on superconductors has e...
متن کاملNANOSTRUCTURED MATERIALS Progress in hydrostatic extrusion of titanium
At the beginning of the present century it has been demonstrated that nanocrystalline titanium (NC-Ti) can be fabricated by hydrostatic extrusion (HE) which is one of the severe plastic deformation method. NC-Ti obtained in such a way exhibited excellent mechanical properties. The influence of HE on the microstructure and mechanical properties of titanium Grade 2 was first analyzed in 2005. In ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of Nonferrous Metals Society of China
سال: 2021
ISSN: 1003-6326
DOI: 10.1016/s1003-6326(21)65608-x