Effect of mechanical stirring on silicon purification during Al-Si solvent refining
نویسندگان
چکیده
منابع مشابه
Removal of B from Si by Hf addition during Al–Si solvent refining process
A small amount of Hf was employed as a new additive to improve B removal in the electromagnetic solidification refinement of Si with an Al-Si melt, because Hf has a very strong affinity for B. The segregation ratio of Hf between the solid Si and Al-Si melt was estimated to range from 4.9 × 10-6 to 8.8 × 10-7 for Al concentrations of 0 to 64 at.%, respectively. The activity coefficient of Hf in ...
متن کاملEFFECT OF REFINING PROCESS ON POROSITY AND MECHANICAL PROPERTIES OF HIGH PRESSURE AL-SI ALLOY DIE CASTINGS
Abstract: This study presents the research results of effect that refining process has on porosity and mechanical properties of high pressure die castings made of AlSi12S alloy. The operation of refining was carried out in a melting furnace with the use of an FDU Mini Degasser. Mechanical properties (UTS, YS, Elongation, Brinell Hardness) were assessed on samples taken from high pressure die ca...
متن کاملEffect OF SI and AL on the Microstructure, Mechanical Properties and Machinability of 65CU-35ZN Brass
Relations between the microstructure, mechanical properties and machinability of as-cast 65Cu-35Zn brass with various amounts of Al from 0 to 4.72 and Si from 0 to 3.62 wt% were investigated. Both Si and Al initially enhanced the UTS and toughness of the brass samples, which led to improvement in machinability due to a reduction in the main cutting force. A duplex brass with random oriented α p...
متن کاملthe effect of e-64 on the developmental competence of sheep cocs during in vitro maturation
in the present study, the effect of e-64 at different concentrations (0.5, 1, 5 and 10 µm) added to (1) the ivm medium on oocyte nuclear maturation and developmental competence of ovine oocytes, and (2) to the ivc medium on embryonic development of ovine embryos were investigated.
The Mechanical Strength of Si Foams in the Mushy Zone during Solidification of Al–Si Alloys
The mechanical strength of an Al-30% Si alloy in the mushy zone was estimated by using a novel centrifugation apparatus. In the apparatus, the alloy melt was partially solidified, forming a porous structure made of primary Si platelets (Si foam) while cooling. Subsequently, pressure generated by centrifugal force pushed the liquid phase out of the foam. The estimated mechanical strength of the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Crystal Growth
سال: 2021
ISSN: 0022-0248
DOI: 10.1016/j.jcrysgro.2020.125943