Effect of minimum quantity solid lubrication (MQSL) parameters on cutting force and temperature during turning of EN31 steel
نویسندگان
چکیده
منابع مشابه
Optimization of Minimum Quantity Liquid Parameters in Turning for the Minimization of Cutting Zone Temperature
The use of cutting fluid in manufacturing industries has now become more problematic due to environmental pollution and health related problems of employees. Also the minimization of cutting fluid leads to the saving of lubricant cost and cleaning time of machine, tool and work-piece. The concept of minimum Quantity Lubrication (MQL) has come in to practice since a decade ago in order to overco...
متن کاملAnalysis of effect of Minimum Quantity Lubrication on different machining parameters Cutting Force, Surface Roughness and Tool Wear by Hard Turning of AISI-4340 Alloy Steel a Review
This paper deals with the study of various machining process and show the effect of different cutting parameters on the properties of material. There are several important factors in the product quality which are surface finish, cutting temperature, tool life and coolant quality. The use of coolant generally causes life of tools and it also maintains work piece surface properties without damage...
متن کاملEffect of Cutting Parameters on Cutting Forces and MRR During Turning Hard Alloy Steel With and Without Coolant
This paper investigates the effect of different cutting parameters (cutting speed, feed rate, and depth of cut) on cutting force components and material removal rate (MRR) in dry and wet hard turning processes. The workpiece material, hardened alloy steel AISI 52100, was machined on a CNC lathe with coated carbide tool under different settings of cutting parameters. Three cutting parameters eac...
متن کاملAnalysis of Minimum Quantity Lubrication (MQL) for Different Coating Tools during Turning of TC11 Titanium Alloy
The tool coating and cooling strategy are two key factors when machining difficult-to-cut materials such as titanium alloy. In this paper, diamond coating was deposited on a commercial carbide insert as an attempt to increase the machinability of TC11 alloy during the turning process. An uncoated carbide insert and a commercial Al₂O₃/TiAlN-coated tool were also tested as a comparison. Furthermo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Today: Proceedings
سال: 2021
ISSN: 2214-7853
DOI: 10.1016/j.matpr.2020.10.119