Effect of Ni Concentrations and C/O Ratios on the Stability of Nonmetallic Inclusions in Ni-Rich Ti-Ni Alloys
نویسندگان
چکیده
منابع مشابه
Effect of Ni on Amorphization of Ti-Cu-Ni Ternary alloys Prepared by Mechanical alloying
Amorphous alloys has been taken into consideration because of their unique properties and are nominated as the future engineering materials. In this research, the effect of Ni and milling time on amorphization process and thermal stability of Ti50Cu50-xNix(x=10, 15, 25 at%) alloy system were investigated. The evolution of amorphization during milling, thermal stability and subsequent heat treat...
متن کاملInternal Friction in Fe-Co-Ni-Ti Shape Memory Alloys
The anomalies of the temperature dependences of the logarithmic decrement and eigen frequency of the free damped vibrations for Fe-Co-Ni-Ti shape memory alloys were first found in the vicinity of the reverse ay martensitic transformation. It was shown the damping capacity in the alloys investigated is comparable with that for TiNi based alloys.
متن کاملInteractions and phase stability in Ni-rich binary alloys
Ni-based superalloys are the important materials for gas turbines in advanced aeroplane engines . The addition of refractory elements to these superalloys, such as rhenium and tungsten, can significantly improve the hightemperature performance by so-called solid-solution hardening. Although the strengthening effect of refractory elements in Ni-based superalloys have been known for a long time, ...
متن کاملTernary Ni-Fe-Co Alloys Nanowire Electrodeposition
Nanowire is a cylindrical nano-structure with nanometer dimensions. In this research, the studied nanowire was made from the magnetic triple Ni-Fe-Co alloy.
 We utilized ordered porous anodic aluminum oxide as a template for the nanowire deposition. The nanowire arrays were electrodeposited in the cylindrical pores of the oxide layer by AC potential in a simple sulfate bath. Then the relatio...
متن کاملElectroplating and characterization of Zn–Ni, Zn–Co and Zn–Ni–Co alloys
a r t i c l e i n f o Zn–Ni, Zn–Co and Zn–Ni–Co coatings were electrodeposited on mild steel from an acidic chloride bath containing p-aminobenzenesulphonic acid (SA) and gelatin. These additives changed the phase content in the coatings, most likely as a result of their adsorption at the surface of the cathode. The effect of gelatin was more pronounced than that of SA. The Faradaic efficiency ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 2021
ISSN: 0021-4876,1880-6880,2433-7501
DOI: 10.2320/jinstmet.j2020056