Effect of Post Deposition Annealing Temperature on the Structural, Optical and Electrical Properties of GZO/Cu Films
نویسندگان
چکیده
منابع مشابه
Effect of Annealing Temperature on Structural, Electrical and Optical Properties of TiO2 Nanopowder
TiO2 nanopowder is prepared by simple sol-gel method using starting material as titanium isopropoxide with methanol and annealed at 600°C, 700°C and 800°C for 1 hour in air. X-ray diffraction pattern revealed the presence of both anatase and rutile phase in TiO2 specimens annealed at different temperatures. It is observed that the content of rutile phase and crystallite size increases with incr...
متن کاملStructural, Electrical and Optical Properties of Molybdenum Oxide Thin Films Prepared by Post-annealing of Mo Thin Films
Molybdenum thin films with 50 and 150 nm thicknesses were deposited on silicon substrates, using DC magnetron sputtering system, then post-annealed at different temperatures (200, 325, 450, 575 and 700°C) with flow oxygen at 200 sccm (standard Cubic centimeter per minute). The crystallographic structure of the films was obtained by means of x-ray diffraction (XRD) analysis. An atomic force micr...
متن کاملStructural, Electrical and Optical Properties of Molybdenum Oxide Thin Films Prepared by Post-annealing of Mo Thin Films
Molybdenum thin films with 50 and 150 nm thicknesses were deposited on silicon substrates, using DC magnetron sputtering system, then post-annealed at different temperatures (200, 325, 450, 575 and 700°C) with flow oxygen at 200 sccm (standard Cubic centimeter per minute). The crystallographic structure of the films was obtained by means of x-ray diffraction (XRD) analysis. An atomic force micr...
متن کاملEffect of Annealing Temperature on the Structural, Magnetic and Optical Properties of SrCo2Fe16O27 Hexaferrite Nanostructure
In this paper, W-type SrCo2Fe16O27 hexaferrite nanostructures were synthesized by sol-gel auto-combustion method. Effect of annealing temperature on the structural, magnetic and optical properties of these SrCo2Fe16O27 nanostructures was investigated. In order to determine the annealing temperature of samples, the prepared gel was examined by thermo-gravimetric and differential-thermal analyses...
متن کاملstructural, electrical and optical properties of molybdenum oxide thin films prepared by post-annealing of mo thin films
molybdenum thin films with 50 and 150 nm thicknesses were deposited on silicon substrates, using dc magnetron sputtering system, then post-annealed at different temperatures (200, 325, 450, 575 and 700°c) with flow oxygen at 200 sccm (standard cubic centimeter per minute). the crystallographic structure of the films was obtained by means of x-ray diffraction (xrd) analysis. an atomic force micr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korean Institute of Electrical and Electronic Material Engineers
سال: 2011
ISSN: 1226-7945
DOI: 10.4313/jkem.2011.24.9.739