Effect of Process Parameters on Microstructure and Properties ofMagnesium Alloy Radar Shell Die Casting
نویسندگان
چکیده
منابع مشابه
EFFECT OF REFINING PROCESS ON POROSITY AND MECHANICAL PROPERTIES OF HIGH PRESSURE AL-SI ALLOY DIE CASTINGS
Abstract: This study presents the research results of effect that refining process has on porosity and mechanical properties of high pressure die castings made of AlSi12S alloy. The operation of refining was carried out in a melting furnace with the use of an FDU Mini Degasser. Mechanical properties (UTS, YS, Elongation, Brinell Hardness) were assessed on samples taken from high pressure die ca...
متن کاملImproving of Microstructure and Mechanical Properties of Al-A356 Alloy with Compo-Casting Method
Aluminum/alumina composites are used in automotive and aerospace industries due to their low density and good mechanical strength. In this research, the effect of mechanical stirring of slurry in liquid-solid phase temperature and injection of alumina powder with inert gas (Ar) on microstructure and mechanical properties of Al-A356 alloy is investigated. In order to improve of the wettability a...
متن کاملStudy of Process Parameters of Gravity Die Casting Defects
In today’s world a casting production without any defect is almost impossible. After the application of various optimization techniques and process we still are not able to get the defect free castings. So it is critically important to analyze the root cause of casting defect with in the process itself, so that any changes which can hamper the defect intensity can be invoked at the time of manu...
متن کاملEffect of Heat Treatment Parameters on the Mechanical and Microstructure Properties of Low-Alloy Steel
This study examines the effect of heat treatment at three different temperatures of 800 ̊C, 950 ̊C and 1100 ̊C on the microstructure and mechanical properties of low-alloy steel with an addition of manganese, chrome and lead. To determine an impact of the applied heat treatment operations, testing of mechanical properties and microstructural examinations of the steel with 0.23%, 0.24%, 0.29% and 0...
متن کاملEffect of Welding Parameters on Microstructure and Mechanical Properties of Cast Fe-40Al Alloy
Friction welding of cast Fe-40Al alloy was carried out at 1000 rmp for various friction times, friction pressures, and forging pressures. The microstructures of the interface of welded samples were analyzed by optical and scanning electron microscopy (SEM). Micrographs demonstrated that excellent welding formed continuously along the interface, except for samples welded for 3 s. Chemical compos...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: DEStech Transactions on Engineering and Technology Research
سال: 2019
ISSN: 2475-885X
DOI: 10.12783/dtetr/icaen201/28996