Effect of rheology and processing parameters on the EPD coatings of basic sol-gel particulate sol
نویسندگان
چکیده
منابع مشابه
Effect of rheology and processing parameters on the EPD coatings of basic sol-gel particulate sol
Homogeneous thick silica coatings were prepared onto metals substrates by Electrophoretic Deposition (EPD) using particulate sol-gel sols. The synthesis of the sols was performed by mixing tetraethoxysilane and methyltriethoxysilane under basic catalysis. The synthesis, storage and processing conditions were optimised, correlating the rheological properties of the sols with EPD performance and ...
متن کاملTHE EFFECT OF PROCESSING PARAMETERS ON SOL GEL SYNTHESIS OF β-SiC NANO POWDER
Mono dispersed nano SiC particles with spherical morphology were synthesized in this project by hydrolysis and condensation mechanism during sol gel processing. pH, temperature and precursor’s ratio considered as the main parameters which could influence particles size. According to DLS test results, the smallest size of particles in the sol (<5nm) was obtained at pH<4. It can be observed from ...
متن کاملContaminant Resistant Sol-Gel Coatings
Valerie Rapson Greece Olympia High School Advisor: Kenneth L. Marshall University of Rochester Laboratory for Laser Energetics Summer High School Research Program 2005 1. Abstract Sol-gel coatings are used on the OMEGA laser optics as anti-reflection (AR) coatings to maximize their transmittance. Over time, trace organic compounds in the laser bay contaminate these sol-gel coatings, reducing th...
متن کاملSilica-Zirconia Coatings Produced by Dipping and EPD from Colloidal Sol–Gel Suspensions
SiO2-ZrO2 sols have been prepared via acid catalysis using a commercial colloidal suspension of zirconia and two silica alkoxides; tetraethoxysilane (TEOS) and methyltriethoxysilane (MTES). Suspensions with 10, 15 and 25-mol% of ZrO2 were prepared. The stability of the suspensions was followed by rheological measurements showing that the amount of water incorporated with the colloidal suspensio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Science
سال: 2004
ISSN: 0022-2461
DOI: 10.1023/b:jmsc.0000012913.66199.6a