Effect of Solution Temperature for Al Alloy Anodizing on Cavitation Characteristics
نویسندگان
چکیده
منابع مشابه
Anodizing of Magnesium Alloy Az31 by Alkaline Solution
-Anodizing of AZ 31 Mg alloy was investigate in 3M KOH solution for 10, 20 and 30min. at constant voltage of 5V. Atomic force microscope (AFM) used to investigate the roughness of anodic film formed on the surface while the scanning electron microscope (SEM) was used to determine the morphology of the anodic film, it was found that the roughness of the anodic film is mainly depend on the anodiz...
متن کاملEffect of anodizing on pulsed Nd:YAG laser joining of polyethylene terephthalate (PET) and aluminium alloy (A5052)
A series of laser joining experiments between polyethylene terephthalate (PET) and aluminium alloy (A5052) were conducted to investigate the effect of anodizing on A5052 surface on dissimilar materials used in joining. In this study, PET/A5052 joints with anodized A5052 surface exhibited greater shear strength compared to PET/A5052 joints without anodizing. The shear strength of the joints was ...
متن کاملImproved Technology for Hard Anodizing Dissolution of Aluminum Alloy Part
This paper deeply analyzes the main factors of the dissolved problems arising in the process of aluminum alloy hard anodizing, combined with the specific problems occurring in production practice, introduces in detail the method and thought to analyze and investigate the causes of dissolving, and puts forward targeted improvement technology. This paper is practically instructive and significant...
متن کاملeffect of oral presentation on development of l2 learners grammar
this experimental study has been conducted to test the effect of oral presentation on the development of l2 learners grammar. but this oral presentation is not merely a deductive instruction of grammatical points, in this presentation two hypotheses of krashen (input and low filter hypotheses), stevicks viewpoints on grammar explanation and correction and widdowsons opinion on limited use of l1...
15 صفحه اولEffects of Anodizing Parameters in Tartaric-Sulphuric Acid on Coating Thickness and Corrosion Resistance of Al 2024 T3 Alloy
2024 T3 is one of aluminium alloys which are widely used in the aircraft structures. Anodizing of alluminium alloy in tartaric-sulphuric acid (TSA) electrolyte is developed to obtain more environmentally-friendly process and to produce anodize layer with better corrosion resistance. In this research work, the influences of anodizing parameters of Al 2024 T3 in TSA on the thickness, weight and c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Corrosion Science and Technology
سال: 2015
ISSN: 1598-6462
DOI: 10.14773/cst.2015.14.3.140