Effect of Target Materials on Deposition of Nitride Films by rf Reactive Magnetron Sputtering
نویسندگان
چکیده
منابع مشابه
Decorative Titanium Nitride Colored Coatings on Bell-Metal by Reactive Cylindrical Magnetron Sputtering
The transition metal nitrides like titanium nitride exhibit very interesting color variation properties depending on the different plasma deposition conditions using cylindrical magnetron sputtering method. It is found in this deposition study that nitrogen partial pressure in the reactive gas discharge environment plays a significant role on the color variation of the film coatings on bell-met...
متن کاملElectron Assisted Deposition of Cubic Boron Nitride by RF Magnetron Sputtering
Public reporting burden for this collection o( information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining Ihe data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this ccfleeüon of information. Including s...
متن کاملCharacterization of PZT Ferroelectric Thin Films by RF-magnetron Sputtering
By using Radio Frequency (RF) magnetron sputtering method, Pb(Zr0.5Ti0.5)O3 (PZT) thin films were deposited on Pt/Ti/ SiO2/Si substrates. Pt/Ti bottom electrode was fabricated on SiO2/Si substrates by magnetron dual-facing-target sputtering system. Phase and crystalline structure analyses of the PZT films were performed on an X-ray diffraction(XRD), Surface morphology, roughness and particle si...
متن کاملNanocharacterization of titanium nitride thin films obtained by reactive magnetron sputtering
Titanium nitride thin films are used in applications such as tribological layers for cutting tools, coating of some medical devices (scalpel blades, prosthesis, implants etc.), sensors, electrodes for bioelectronics, microelectronics, diffusion barrier, bio-microelectromechanical systems (Bio-MEMS) and so on. This work is a comparative study concerning the influence of substrate temperature on ...
متن کاملDEPOSITION OF THIN TiO2 FILMS BY DC MAGNETRON SPUTTERING METHOD
Sputter deposition process is another old technique being used in modern semiconductor industries. Sputtering is a process that can deposit TiO2 material on wafer/glass substrates. In this process target is connected to negative high voltage. Further argon gas is introduced into the chamber and is ionized to a positive charge. The positively charged argon atoms are attracted and strike the nega...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Precision Engineering
سال: 2003
ISSN: 1882-675X,0912-0289
DOI: 10.2493/jjspe.69.976