Effect of the Cutting Tool Geometry on the Tool Wear Resistance When Machining Inconel 625
نویسندگان
چکیده
منابع مشابه
the effect of using learning logs as a self-assessment tool on the syntactic development among iranian pre-intermediate efl learners
چکیده: هدف از انجام این پژوهش ،بررسی استفاده از یادداشتهای یادگیری به عنوان یکی از ابزار های خود ارزشیابی بر افزایش مهارت دستوری (صورتهای شرطی و مجهول) زبان آموزان در مقطع پیش متوسطه بوده است .بدین منظور یک تست استاندارد در مقطع پیش متوسطه بین 90 نفر زبان آموز در سنین 15 تا 20 سال در آموزشگاه زبان انگلیسی امین و پارسا در شهرستان شاهرود برگزار شد از میان این افراد 60 فراگیر انتخاب شدند. و این 6...
On the Physics of Machining Titanium Alloys: Interactions between Cutting Parameters, Microstructure and Tool Wear
The current work deals with the analysis of mechanisms involved during the machining process of titanium alloys. Two different materials were chosen for the study: Ti-6Al-4V and Ti-55531. The objective was to understand the effect of all cutting parameters on the tool wear behavior and stability of the cutting process. The investigations were focused on the mechanisms of the chip formation proc...
متن کاملCheck Tic-coated Tungsten Carbide Tool Wear in Machining Steel
In industrial production systems, including the most important factors in the economic field machining operations, reduce tool wear due to abrasive nature of the phenomenon on many factors, including temperature Lathe tool, influences, machining conditions (cutting speed, speed losses, forcing to rebuild parts of the manufacturing tolerances disassemble tool wear is caused by the phenomenon, as...
متن کاملTool wear estimation in micro-machining. Part I: tool usage–cutting force relationship
The relationship between the cutting force characteristics and tool usage (wear) in a micro-end-milling operation was studied for two different metals. Neural-network-based usage estimation methods are proposed that use force-variationand segmental-averaging-based encoding techniques. 1999 Elsevier Science Ltd. All rights reserved.
متن کاملInfluence of machining cycle of horizontal milling on the quality of cutting force measurement for the cutting tool wear monitoring
The cutting tools are today used a lot by industry and they are expensive, so it was interesting to optimize their use, by developing a predictive method of their wear, particularly, the flank wear Vb. For this task, the flank tool wear was measured in off-line using a binocular microscope, whereas, the cutting forces are recorded by means of a dynamometer (Kistler 9255B). The acquired signatur...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Science and Technology Research Journal
سال: 2017
ISSN: 2080-4075,2299-8624
DOI: 10.12913/22998624/80925