Effect of tire rubber particles on crack propagation in cement paste
نویسندگان
چکیده
منابع مشابه
Influence of Nano-Particles on Characteristics of MetakaolinContained Cement Paste
The influences of nano-ZrO2 (NZ), nano-TiO2 (NT), nano-Fe2O3 (NF) and nano-Al2O3 (NA) additions on properties of the fresh and hardened cement paste in comparison with the fine cement paste were experimentally studied. Mini slump and flow cone tests were conducted on fresh cement pastes. Moreover the compressive and tensile strength of hardened cement paste were measured. SEM micrographs and XR...
متن کاملScaling of crack propagation in rubber sheets
We have conducted experiments and numerical simulations to investigate supersonic cracks. The experiments are performed at 85 ◦C to suppress strain-induced crystallites that complicate experiments at lower temperature. Calibration experiments were performed to obtain the parameters needed to compare with a theory including viscous dissipation. We find that both experiments and numerical simulat...
متن کاملCrack Propagation Speed in the Drying Process of Paste
We investigated crack propagation in the drying process of a thin layer of calcium carbonate (CaCO3) paste experimentally. Cracks are induced by uniform desiccation from the top surface of a layer at the approximately same water content for various drying conditions. We found that the crack speed is a nonlinear increasing function of the drying rate at the cracking time although the tensile str...
متن کاملThe effect of moisture absorption on the fatigue crack propagation resistance of acrylic bone cement.
In vivo, bone cement is subject to cyclic loading in a fluid environment. However, little is known about the effect of moisture absorption on the fatigue crack propagation resistance of bone cement. The effect of moisture absorption at 37 degrees C on the fatigue crack propagation resistance of a common bone cement (Endurance, DePuy, Orthopaedics, Inc.) was examined. Preliminary fracture toughn...
متن کاملEffect of Crack Blunting on Subsequent Crack Propagation
Theories of toughness of materials depend on an understanding of the characteristic instabilities of the crack tip, and their possible interactions. In this paper we examine the effect of dislocation emission on subsequent cleavage of a crack and on further dislocation emission. The work is an extension of the previously published Lattice Greens Function methodology[1, 2, 3]. We have developed ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research
سال: 2006
ISSN: 1516-1439
DOI: 10.1590/s1516-14392006000300011