Effect of Various Reinforcing Materials for Resin Denture Base
نویسندگان
چکیده
منابع مشابه
Effect of disinfectant solutions on a denture base acrylic resin.
The aim of this study was to evaluate the hardness, roughness and mass loss of an acrylic denture base resin after in vitro exposure to four disinfectant solutions. Forty specimens (Clássico, Brazil) were prepared and randomly assigned to 4 groups n = 10) according to the disinfectant solution: G1: control, stored in distilled water at 37 degrees C; G2: 1% sodium hypochlorite; G3: 2% glutaralde...
متن کاملReinforcing effect of glass fiber-reinforced composite reinforcement on flexural strength at proportional limit of a repaired denture base resin
Objective: This study evaluated the reinforcing effect of glass fiber-reinforced composite (FRC) reinforcement on flexural strength at the proportional limit (FS-PL) of a repaired denture base resin. Materials and methods: Repaired denture base resins reinforced with metal and with FRC reinforcement, and that without reinforcement were tested. The ultimate flexural strength, the FS-PL and the e...
متن کاملBonding of Acrylic Resin Teeth with Denture Base Resin
The debonding of acrylic resin teeth with the denture base resin has been related to several different factors of which contamination of the bonding surfaces with wax has been suggested as the major cause. The purpose of this study was to determine the efficient method of wax removal from denture teeth using hot water at different temperatures ranges. Acrylic rods were used as tooth analogues a...
متن کاملEffect of Mechanical Modification of Acrylic Resin Denture Teeth Bonded to Acrylic Denture Base
Techniques for bonding denture teeth to acrylic resin denture base remains empirical, with little consensus from the literature, among clinicians or among dental laboratories. Despite of this great variation, the data available regarding effectiveness of various methods used are sparse. The study was carried out to compare the effect of different surface treatments of ridge lap area of acrylic ...
متن کاملShear Bond Strength of Acrylic Denture Teeth to PMMA and Polyamide Denture Base Materials
Introduction: Detachment of denture teeth from denture base is one of the most common reasons for costly denture repairs .This study aimed at evaluating the bond strength of an acrylic denture tooth to polyamide injection-molded thermoplastic denture base material compared with three conventional polymethylmethacrylate (PMMA) denture base resins. Materials and Method: A total of 40 acrylic dent...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nihon Hotetsu Shika Gakkai Zasshi
سال: 2004
ISSN: 1883-177X,0389-5386
DOI: 10.2186/jjps.48.592