Effect of Weld Line Direction on Tensile Deformation Behavior —Development of Forming Technology for Tailor-Welded Blank Application 2nd Report—
نویسندگان
چکیده
منابع مشابه
effect of oral presentation on development of l2 learners grammar
this experimental study has been conducted to test the effect of oral presentation on the development of l2 learners grammar. but this oral presentation is not merely a deductive instruction of grammatical points, in this presentation two hypotheses of krashen (input and low filter hypotheses), stevicks viewpoints on grammar explanation and correction and widdowsons opinion on limited use of l1...
15 صفحه اولA Novel Approach for Formability Prediction of Tailor Welded Blank
Formability of Tailor Welded Blank (TWB) is an important parameter which limits this kind of blanks usage. A forming criterion for tailor welded blank is presented based on the analytical model in this research. This criterion suggests Limit Strength Ratio (LSR) and Limit Thickness Ratio (LTR) for forming limit of TWB. When thickness ratio or strength ratio in tailor welded blank is greater tha...
متن کاملinvestigation of forming limit and weld line movement in the forming of tailor welded blanks using experiment and numerical methods
the forming limit diagram (fld) is a useful method for characterizing the formability of sheet metals. in this paper, different numerical models were used to investigate the fld of tailor welded blank (twb). twbs were co2 laser-welded samples of interstitial-free (if) steel sheets with different thicknesses. the results of the numerical models were compared with the experimental fld as well as ...
متن کاملOptimum Tailor-welded Blank Design Using Deformation Path Length of Boundary Nodes
In this paper, the optimum shape of Tailor-Welded Blanks (TWB) is investigated. The optimization is performed for two different case studies. The first example is deep drawing of a TWB with dissimilar materials and uniform thicknesses and the next example is deep drawing of a TWB with similar materials and non-uniform thicknesses. The effect of blank optimization on the weld line movement is...
متن کاملInvestigation on Formability of Tailor-Welded Blanks in Incremental Forming
Steel laser tailor-welded blanks (TWBs) are produced by end-to-end joining of base sheets using different welding methods. In this article, the formability of laser TWBs of St12 and St14 with thicknesses of 1 mm and 1.5 in single point incremental forming process were experimentally and numerically investigated. First, the forming limit wall angle was experimentally determined for each of the b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATERIALS TRANSACTIONS
سال: 2020
ISSN: 1345-9678,1347-5320
DOI: 10.2320/matertrans.p-m2020835