Effect of Wind Power Generator Blade Surface Condition on Surface Discharge
نویسندگان
چکیده
Recently, wind power generators are being introduced all over the world. However, in Japan, damage caused by lightning strikes is not small, and their introduction has been stagnant. In this study, surface discharge phenomena were investigated to reduce on generators. Experimental results of effects conditions generator blades have reported.
منابع مشابه
Simulating Cooling Injection Effect of Trailing Edge of Gas Turbine Blade on Surface Mach Number Distribution of Blade
In this research, a gas turbine blade cascade was investigated. Flow analysis around the blade was conducted using RSM and RNG.K-ε turbulence modeling and it is simulated by Fluent software. The results were considered for the cases as Mach number loss at the trailing edge of blade caused by vortexes that were generated at the end of blade. Effect of cooling flow through the trailing edge on th...
متن کاملEffect of Wind Speed and Load Correlation on ELCC of Wind Turbine Generator
Utilization of wind turbines as economic and green production units, poses new challenges to the power system planners, mainly due to the stochastic nature of the wind, adding a new source of uncertainty to the power system. Different types of distribution and correlation between this random variable and the system load makes conventional method inappropriate for modeling such a correlation. In...
متن کاملOptimization of surface mounted axial flux switching generator with response surface method
In this paper, a novel structure of a axial flux switching machines for use in wind speed turbines at low speeds has been proposed, which in addition to the previous advantages, has a simple and economical design for the production of this type of machines. In this proposed machine, the magnets are placed on the surface of stator, and the three-phase winding is located in the space between the ...
متن کاملExperimental Study on the Surface Modification by Electrical Discharge Process
The creation of modified layer on metal surfaces using new methods is one of the procedures in surface engineering which can improve the surface mechanical properties. The electrical discharge process is a new method that can form a modified layer on the metal surfaces. This study aims to improve of pure aluminum surface properties through Electrical Discharge process with Monel 400 electrode. ...
متن کاملwind farm impact on generation adequacy in power systems
در سال های اخیر به دلیل افزایش دمای متوسط کره زمین، بشر به دنبال روش های جایگزین برای تامین توان الکتریکی مورد نیاز خود بوده و همچنین در اکثر نقاط جهان سوزاندن سوخت های فسیلی در نیروگاه های حرارتی به عنوان مهم ترین روش تولید توان الکتریکی مطرح بوده است. به دلیل توجه به مسایل زیست محیطی، استفاده از منابع انرژی تجدید پذیر در سال های اخیر شدت یافته است. نیروگاه های بادی به عنوان یک منبع تولید توان...
15 صفحه اولذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sangyo oyo kogakkai ronbunshi
سال: 2022
ISSN: ['2187-5146', '2189-373X']
DOI: https://doi.org/10.12792/jjiiae.10.1.38