Effective filtering of modal curvatures for damage identification in beams

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

An effective approach for damage identification in beam-like structures based on modal flexibility curvature and particle swarm optimization

In this paper, a computationally simple approach for damage localization and quantification in beam-like structures is proposed. This method is based on using modal flexibility curvature (MFC) and particle swarm optimization (PSO) algorithm. Analytical studies in the literature have shown that changes in the modal flexibility curvature can be considered as a sensitive and suitable criterion for...

متن کامل

Damage identification in beams using inverse methods

Beams, made of brittle materials like concrete or cement, show increasing crack development during their service life due to mechanical and environmental loadings. This local damage can be translated into a reduction of the local bending stiffness. Stiffness modifications, while assuming constant mass distribution, can be observed by monitoring the vibrational behavior of the beam. In this pape...

متن کامل

A Procedure for Multiple Damage Identification in Elastic Beams

1. Abstract This paper concerns with the identification of multiple cracks in a beam by measurements of the damage-induced variations in the static deflection of the beam under a prescribed load condition. Each crack is simulated by an equivalent linear elastic rotational spring connecting the two adjacent segments of the beam. Sufficient conditions on the static measurements which allow for th...

متن کامل

DAMAGE IDENTIFICATION BY USING MODAL EXPANSION AND TOPOLOGY OPTIMIZATION IN THREE DIMENSIONAL ELASTICITY PROBLEMS

In this paper, topology optimization is utilized for damage detection in three dimensional elasticity problems. In addition, two mode expansion techniques are used to derive unknown modal data from measured data identified by installed sensors. Damages in the model are assumed as reduction of mass and stiffness in the discretized finite elements. The Solid Isotropic Material with Penalization (...

متن کامل

AN IMPROVED CHARGED SYSTEM SEARCH FOR STRUCTURAL DAMAGE IDENTIFICATION IN BEAMS AND FRAMES USING CHANGES IN NATURAL FREQUENCIES

It is well known that damaged structural members may alter the behavior of the structures considerably. Careful observation of these changes has often been viewed as a means to identify and assess the location and severity of damages in structures. Among the responses of a structure, natural frequencies are both relatively easy to obtain and independent from external excitation, and therefore, ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Procedia Engineering

سال: 2017

ISSN: 1877-7058

DOI: 10.1016/j.proeng.2017.09.119