Effects of Be and Na on precipitation process in Al-Mg2Si alloys
نویسندگان
چکیده
منابع مشابه
PRECIPITATION PROCESS OF Al-Sc ALLOYS
Precipitation process in an A1-0.25 wt.%Sc alloy aged at 573 K has been investigated by resistivity and hardness measurements, transmission electron microscopy, and atom-probe field ion microscopy. It was found that the equilibrium A13Sc phase particles precipitate homogeneously from the begining. The particles coarsen following the Lifschitz-Wagner rule after the completion of the nucleation-a...
متن کاملEffects of Li additions on precipitation-strengthened Al–Sc and Al–Sc–Yb alloys
Two Al–Sc-based alloys (Al–0.12Sc and Al–0.042Sc–0.009Yb, at.%) and their counterparts with Li additions (Al–2.9Li–0.11Sc and Al–5.53Li–0.048Sc–0.009Yb, at.%) are aged at 325 C. For both base alloys, the addition of Li results in greater peak hardness from incorporation of Li in the L12-structured a-Al3(Sc,Li) and a-Al3(Sc,Li,Yb) precipitates, and a concomitant increase in number density and vo...
متن کاملTHE EFFECT OF AGING ON THE CLUSTERING AND PRECIPITATION PROCESS IN Al-Mg-Si ALLOYS
The dependence of the mechanism of age hardening in Al-Mg-Si alloys on their Si content, the pre-aging conditions and addition of Cu has been investigated. For this purpose, the solute clusters and the metastable precipitates in aged Al-Mg-Si alloys have been characterized by a three dimensional atom probe (3DAP) and transmission electron microscopy (TEM). Atom probe analysis results have revea...
متن کاملPrecipitation hardening in dilute Al–Zr alloys
The aim of this study was to investigate the effect of solute content (hipoperitectic Al–0.22 wt.%Zr and hiperperitectic Al–0.32 wt.%Zr) on the precipitation hardening and microstructural evolution of dilute Al–Zr alloys isothermally aged. The materials were conventionally cast in a muffle furnace, solidified in a water-cooled Cu mold and subsequently heat-treated at the temperature of 650 K (3...
متن کاملEffects of Complex Modification by Sr–Sb on the Microstructures and Mechanical Properties of Al–18 wt % Mg2Si–4.5Cu Alloys
This research was carried out to investigate the influence of Sr–Sb on the microstructures and mechanical properties of Al–18 wt % Mg2Si–4.5Cu alloys. After the addition of 0.2 wt % Sr–Sb, the morphologies of primary Mg2Si transformed from equiaxed dendrite to cube in as-cast alloys and the average size of primary Mg2Si decreased from ~50 to ~20 μm. The shape of eutectic Mg2Si changed from Chin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Institute of Light Metals
سال: 1972
ISSN: 0451-5994
DOI: 10.2464/jilm.22.325