Effects of Layer Thickness and Edge Conditions to Thermoelastic Characteristics on Thermal Barrier Coatings

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

THE EFFECTS OF PLASMA SPRAY PARAMETERS ON THE MICROSTRUCTURE AND PHASE COMPOSITION OF THERMAL BARRIER COATINGS MADE BY SPPS PROCESS

In this paper the effect of plasma spray parameters, atomizing gas and substrate preheat temperature on microstructure and phase composition of YSZ coatings produced by SPPS process have been investigated. The experimental results showed that increasing the power of plasma, using hydrogen as the precursor atomizing gas and increasing substrate preheat temperature decrease the amount of non-pyro...

متن کامل

Top layer coatability on barrier coatings

The influence on top layer coatability by different surface characteristics of dispersion coated barrier layers was studied. The barrier layer consisted of platy pigments such as talc and kaolin combined with different amounts and types of latexes. Coating of the top coat was carried out using reverse gravure technique where the dispersion consisting of mineral pigments and latex is applied und...

متن کامل

AN INVESTIGATION ON EFFECT OF BOND COAT REPLACEMENT ON HOT CORROSION PROPERTIES OF THERMAL BARRIER COATINGS

In the present study NiCrAlY bond coating layer was produced by electroplating against common atmospheric plasma spraying (APS). Both types of the bond coats were applied on IN738LC base metal then, the YSZ (ZrO2-8% Y2O3) thermal barrier top layer was coated by atmospheric plasma spray technique. Hot corrosion is one of the main destructive factors in thermal barrier coatings (TBCs) which come ...

متن کامل

Study on Stress Development in the Phase Transition Layer of Thermal Barrier Coatings

Stress development is one of the significant factors leading to the failure of thermal barrier coating (TBC) systems. In this work, stress development in the two phase mixed zone named phase transition layer (PTL), which grows between the thermally grown oxide (TGO) and the bond coat (BC), is investigated by using two different homogenization models. A constitutive equation of the PTL based on ...

متن کامل

Microstructural investigations of EBPVD thermal barrier coatings

This paper deals with the morphology, constitutive phases and fine microstructures of some EBPVD processed yttria partially stabilized zirconia thermal barrier coatings. This study has been performed by X-ray diffraction and scanning and transmission electron microscopy. It was shown that the coatings studied were constituted of a single metastable tetragonal t' phase, as expected if one refers...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Applied Mathematics

سال: 2014

ISSN: 2152-7385,2152-7393

DOI: 10.4236/am.2014.516233