Effects of Process Parameters on the Thickness Uniformity in Two-Point Incremental Forming (TPIF) with a Positive Die for an Irregular Stepped Part
نویسندگان
چکیده
منابع مشابه
The Effects of Forming Parameters on the Single Point Incremental Forming of 1050 Aluminum Alloy Sheet
The single point incremental forming (SPIF) is one of the dieless forming processes which is widely used in the sheet metal forming. The correct selection of the SPIF parameters influences the formability and quality of the product. In the present study, the Gurson-Tvergaard Needleman (GTN) damage model was used for the fracture prediction in the numerical simulation of the SPIF process of alum...
متن کاملTwo point incremental forming of a complicated shape with negative and positive dies
In this work, incremental sheet forming of a complicated shape is investigated experimentally. Two point incremental forming with negative and positive dies are employed for manufacturing of a complicated shape with positive and negative truncated cones. The material is aluminum alloy 3105 with a thickness of 1 mm. The effects of process parameters such as sequence of positive and negative form...
متن کاملDesign and manufacture a novel tool in the incremental sheet metal forming process and its effects on the process parameters
One of the methods for making prototypes is incremental forming process. In this method, the forming tool, performs a pre-programmed movement by the CNC machine and runs the desired path. This modernization process is used in the automotive, aerospace, military, medical and other industries. One of the most influential parameters in this process is forming tool. This parameter is effective in f...
متن کاملAn Experimental Study on the process parameters of Incremental Forming of Explosively-Welded Al/Cu Bimetal
Single point incremental sheet metal forming is a sheet metal forming process that forms products without the complex dies and tools with low cost. In this study, the incremental sheet metal forming process has been experimentally investigated on the explosively-welded Al/Cu bimetal sheets. Also, the effects of process parameters, such as arrangement of layer`s bimetal, tool diameter and tool p...
متن کاملthe effects of changing roughness on the flow structure in the bends
flow in natural river bends is a complex and turbulent phenomenon which affects the scour and sedimentations and causes an irregular bed topography on the bed. for the reason, the flow hydralics and the parameters which affect the flow to be studied and understand. in this study the effect of bed and wall roughness using the software fluent discussed in a sharp 90-degree flume bend with 40.3cm ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2020
ISSN: 1996-1944
DOI: 10.3390/ma13112634