Effects of Tool Geometry on Hardened Layer of Friction Stir Processed Cast Iron
نویسندگان
چکیده
منابع مشابه
environmental effects of gol-e-gohar iron ore mine on groundwater of the area
gol-e-gohar iron ore mine of sirjan in southern part of iran is a large open pit that operates below the groundwater table and during mining operation, dewatering is required to prevent operation processes from flooding. current operation is going on by digging wells in or out of the pit and pumping to prevent flooding. as a result of the former dewatering operation a vast deep cone of depressi...
Simulation of Tool Rotation and Travelling Speed Effects on Friction Stir Welding of Ti-6Al-4V
In this research, the effects of parameters include tool rotational and traverse speeds were investigated on heat generation and material flow during friction stir welding of Ti-6Al-4V alloy with computational fluid dynamics (CFD) method. Simulation results showed that with increasing of tool rotational and decreasing tool traverse speed, the more frictional heat generates which causes formatio...
متن کاملTool Geometry for Friction Stir Welding—Optimum Shoulder Diameter
The most important geometric parameter in the friction stir welding (FSW) tool design is the shoulder diameter, which is currently estimated by trial and error. Here, we report a combined experimental and theoretical investigation on the influence of shoulder diameter on thermal cycles, peak temperatures, power requirements, and torque during FSW of AA7075-T6. An optimum tool shoulder diameter ...
متن کاملModeling of heat generations for different tool profiles in friction stir welding: study of tool geometry and contact conditions
In this work, improved heat generation models are developed for straight and tapered shoulder geometries with different tool pin profiles in friction stir welding. The models are developed considering the welding process as a combination of the pure sliding and the pure sticking conditions. From the results, the amount of heat generation is directly proportional to the number of edges in the pi...
متن کاملSimulation of Tool Rotation and Travelling Speed Effects on Friction Stir Welding of Ti-6Al-4V
In this research, the effects of parameters include tool rotational and traverse speeds were investigated on heat generation and material flow during friction stir welding of Ti-6Al-4V alloy with computational fluid dynamics (CFD) method. Simulation results showed that with increasing of tool rotational and decreasing tool traverse speed, the more frictional heat generates which causes formatio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATERIALS TRANSACTIONS
سال: 2012
ISSN: 1345-9678,1347-5320
DOI: 10.2320/matertrans.f-m2012824