Effects of using recycled concrete aggregates on the shrinkage of high performance concrete

Performance of High-strength Concrete Made with Recycled Ceramic Aggregates

Recent scientific concerns to achieve sustainability in construction have suggested the implementation of using recycled aggregate in concrete because it has the potential to reduce the demand for extraction of natural raw materials and decrease the volume of wastes landfilled. In this respect, this study aims to investigate the suitability of using ceramic tile (CT) and ceramic sanitary (CS) w...

Effects of Recycled Concrete Aggregates on Properties of Asphalt Concrete

Drying shrinkage of concrete made from recycled concrete aggregate

Recycled concrete aggregates (RCA) are used in new concrete mixes, termed recycled aggregate concrete (RAC). Among losses in most fresh and hardened properties, literature reports that RAC suffers increased levels of drying shrinkage compared to equivalent mixes incorporating conventional aggregates. This paper describes the procedure and results of a range of experiments conducted on a commerc...

the effect of taftan pozzolan on the compressive strength of concrete in the environmental conditions of oman sea (chabahar port)

cement is an essential ingredient in the concrete buildings. for production of cement considerable amount of fossil fuel and electrical energy is consumed. on the other hand for generating one tone of portland cement, nearly one ton of carbon dioxide is released. it shows that 7 percent of the total released carbon dioxide in the world relates to the cement industry. considering ecological issu...

Low Cycle Fatigue Behavior of Concrete with Recycled Concrete Aggregates

A comparison of concrete containing recycled concrete coarse aggregates and natural coarse aggregates subjected to high strain, low cycle compressive fatigue is presented. Using a strain based feedback control loop, concrete cylinders are compressed at 15µε/s to a specified strain then unloaded to zero stress for 10 cycles. After cycling, all samples are loaded to a strain of 0.008. Direct conc...