Efficiency and losses analysis of low-pressure feed water heater in steam propulsion system during ship maneuvering period
نویسندگان
چکیده
منابع مشابه
Model identification and dynamic analysis of ship propulsion shaft lines
Dynamic response analysis of mechanical structures is usually performed by adopting numerical/analytical models. Finite element (FE) modeling as a numerical approach plays an important role in dynamic response analysis of complex structures. The calculated dynamic responses from FE analysis are only reliable if accurate FE models are used. There are many elements in real mechanical structures w...
متن کاملThe optimum pressure for working fluid in feed water heaters of steam power plants
The aim of this study is to find the optimal water pressure and percentage of supply vapour in the feed water heaters (fwhs) of steam power plants, such that they maximize the thermal efficiency of the Rankine cycle within pre-specified values of minimum and maximum pressures of the thermodynamic cycle. Thermal efficiency is defined as a function of unknown variables (fluid pressure and vap...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
The optimum pressure for working fluid in feed water heaters of steam power plants
The aim of this study is to find the optimal water pressure and percentage of supply vapour in the feed water heaters (fwhs) of steam power plants, such that they maximize the thermal efficiency of the Rankine cycle within pre-specified values of minimum and maximum pressures of the thermodynamic cycle. Thermal efficiency is defined as a function of unknown variables (fluid pressure and vap...
متن کاملconsequence analysis of the leakage, ignition and explosion during high pressure sour gas injection process to the oil reservoir
there is no doubt that human being needs to become integrated with industry and industry needs to be progressed, daily. on the other hand, serious events in industrial units specially in oil industries has been shown that such damages and events are industry related ones. the consequence of such events and damages which resulted in chemical and poisoned explosions and loss of life and property ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Pomorstvo
سال: 2016
ISSN: 1846-8438,1332-0718
DOI: 10.31217/p.30.2.6