Efficiency and Slippage in Draw Gears with Flat Belts
نویسندگان
چکیده
This paper presents the measured energy losses in a draw gear with NE22, XH500, LL2, and CFG flat belts. The ranges of torque capacity, slippage occurrence, transmission efficiency selected drive belts are also presented. Knowing exact values these parameters allows selection most suitable for different applications. In addition, belt manufacturers do not provide data accurately, leading to machine failures downtime. describes dependence as function load. Running transmissions high associated significant loss efficiency, rapid wear pulleys, increased operating temperature. when under excessive load, it is common quickly fall off interrupting operation machinery equipment. Experiments on test bench can accurately determine caused by slippage. maximum achievable study, which differed construction materials, was around 6 Nm 12 NE22. Slippage reached 0.005 0.1, while ranged between 0.60 0.97.
منابع مشابه
the past hospitalization and its association with suicide attempts and ideation in patients with mdd and comparison with bmd (depressed type) group
چکیده ندارد.
Running-in of gears - surface and efficiency transformation
With ever shorter development times and market demands on overall system performance such as efficiency, reliability and low maintenance, accurate predictive tools are necessary and gear drives prove to be no exception. All these characteristics have an impact on a process which has remained a riddle: running-in. Even though no consensus on a definition of this phenomena is readily available, t...
متن کاملEfficiency and Temperature of Spray Lubricated Superfinished Spur Gears
Gearboxes are one of the most power dense systems used today, and in certain instances their limiting factor is the ability to evacuate heat from the gear contact. This work analyses the efficiency (i.e. heat generation) and tooth temperature in the three lubricating conditions dip, into mesh spray and out of mesh spray for superfinished gears which are then compared to ground gears. A back-to-...
متن کاملA Comparative Study of Tooth Wear, Mechanical Power Losses and Efficiency in Normal and High Contact Ratio Asymmetric Spur Gears
The surface tooth wear which occurs at the gear contact region due to inadequate contact strength of the tooth is one of the predominant modes of gear failures. Currently, higher contact ratio spur gears are increasingly used in power transmission applications such as aircraft, wind turbine, automobiles and compact tracked vehicles due to their high load carrying capacity. In this work, the di...
متن کاملevolutionary origin and phylogenetic relationships among fusarium oxysporum f. sp. melonis isolates in iran and their relationship with nonpathogenic isolates
پژمردگی فوزاریومی خربزه و طالبی با عامل fusarium oxysporum f. sp. melonis از بیماری های مهم قارچی در مناطق رشد این گیاهان می باشد. جدایه های f. oxysporum از گیاهان و خاک ریزوسفر متعلق به پنج استان مهم تولیدکننده ی خربزه و طالبی جداسازی شد و بر پایه ی بیماری زایی در ارقام افتراقی، گروه های سازگاری رویشی (vegetative compatibility groups)، توالی سنجی ناحیه ی جداکننده ی بین ژنی دی اِن اِی ریبوزومی (n...
15 صفحه اولذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energies
سال: 2022
ISSN: ['1996-1073']
DOI: https://doi.org/10.3390/en15239184