Efficient organic distributed feedback lasers with imprinted active films

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Efficient organic distributed feedback lasers with active films imprinted by thermal nanoimprint lithography

Organic solid-state lasers (OSLs) have been a subject of intense research for many years [1] mainly due to the various advantages of organic materials, such as easy processability, chemical versatility, wavelength tunability and low cost. Among the various types of resonators used in the field of OSLs, distributed feedback (DFB) structures are probably the most extensively studied. As compared ...

متن کامل

Organic semiconductor lasers with two-dimensional distributed feedback

Photograph of a mechanically flexible 2D-DFB laser made from the conjugated polymer MeLPPP. The laser is optically pumped well above the threshold for amplified spontaneous emission. The complex far-field emission pattern (blue-green) results from a large detuning between the resonance wavelength and the gain maximum. • A nearly diffraction limited surface emitting conjugated polymer laser util...

متن کامل

Nonlinear dynamics of semiconductor lasers with active optical feedback.

An in-depth theoretical as well as experimental analysis of the nonlinear dynamics in semiconductor lasers with active optical feedback is presented. Use of a monolithically integrated multisection device of submillimeter total length provides access to the short-cavity regime. By introducing an amplifier section as a special feature, phase and strength of the feedback can be separately tuned. ...

متن کامل

GaAs-GaAlAs Double-Heterostructure Injection Lasers with Distributed Feedback

GaAs-GaAlAs double-heterostructure distributed-feedback injection lasers are investigated a t temperatures between 80 and 150 K under pulsed operation. The optical feedback for laser oscillation is provided by a corrugated interface between the p-GaAs active layer and the pGaA1As layer. The corrugation is made by two methods, ion milling and chemical etching, and the latter method is found to g...

متن کامل

Blue surface-emitting distributed feedback lasers based on TPD-doped films.

Single-mode second-order distributed feedback (DFB) lasers with low threshold, based on polystyrene films doped with 30 wt. % of the hole-transporting organic molecule N,N'-bis (3-methylphenyl)-N,N'-diphenylbenzidine (TPD) are reported. The laser emission wavelength was tuned between 415 and 427 nm by film thickness variation. The effectiveness of the DFB grating in improving the laser performa...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Optics Express

سال: 2011

ISSN: 1094-4087

DOI: 10.1364/oe.19.022443