Effort and bearing capacity testing of laterally restrained asymmetrical stepped steel I-columns
نویسندگان
چکیده
منابع مشابه
Cyclic Testing of Braces Laterally Restrained by Steel Studs
This paper experimentally investigates the cyclic inelastic performance of concentrically braced frames with and without cold formed steel stud ~CFSS! infills designed to laterally restrain braces and delay their buckling. Specimens have either diagonal tube or solid bar braces with and without CFSS and U brackets providing out-of-plane and in-plane buckling restraint. Behavioral characteristic...
متن کاملANALYTICAL STUDY OF STEEL I-BEAM WITH STEPPED FLANGES
This paper presents a parametric study of steel I- beam with stepped flanges by using finite element analysis. Stepped flange beam is used in structures to decrease the negative bending moments near interior supports that causes failure due to buckling. Steps in the cross section can be achieved by adding cover plates to the beam flanges, changing the size of the hot rolled section, or changing...
متن کاملHysteretic Energy Dissipation in Laterally Restrained Steel Tube and Solid Bar Braces
This paper describes an experimental investigation into the seismic behavior and efficiency of steel frames with special bracing infills. Cold formed steel studs (CFSS), typically used in nonstructural partition walls, were studied to determine if they could be used to laterally restrain braces against buckling and thus enhance their seismic performance. Four specimens were ductile designed and...
متن کاملBridge Piers with Structural Fuses and Bi-Steel Columns. I: Experimental Testing
Structural fuses, easily replaceable sacrificial elements to dissipate seismic energy while preventing damage to the gravity loadresisting structural system, are proposed as part of a multicolumn accelerated bridge construction (ABC) pier concept. Different types of structural fuses are investigated to compare the effect of each on ABC bridge bents. The piers of a three span-continuous bridge p...
متن کاملPerformance of Stiffened Slender Built up Steel I-Columns
Abstract—The present work illustrates a parametric study for the effect of stiffeners on the performance of slender built up steel Icolumns. To achieve the desired analysis, finite element technique is used to develop nonlinear three-dimensional models representing the investigated columns. The finite element program (ANSYS 13.0) is used as a calculation tool for the necessary nonlinear analysi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Constructional Steel Research
سال: 2020
ISSN: 0143-974X
DOI: 10.1016/j.jcsr.2020.106181