ELASTIC LATERAL BUCKLING STRENGTH OF H-SHAPED STEEL BEAMS UNDER ARBITRARY BOUNDARY CONDITIONS
نویسندگان
چکیده
منابع مشابه
Lateral-torsional buckling resistance of cold-formed high strength steel rectangular hollow beams
Hollow sections have been widely used for steel structures. Applications of High Strength Steel (HSS) on cold-formed hollow sections lead to thinner and lighter structures. This paper presents numerical investigations on the lateral-torsional buckling resistance of the cold-formed high strength steel rectangular hollow beam. Results from finite element analysis using Abaqus software are compare...
متن کاملFlexural -Torsional Buckling Tests of Cold-Formed Lipped Channel Beams Under Restrained Boundary Conditions
In this paper, tests on flexural buckling ( Lateral – Torsional ) of cold-formed steel(CFS) lipped Channel beams under restrained boundary conditions are described Two point loading for flexural tests have been established for 3.0m span to obtain uniform bending moment. The section sizes selected for testing are 100x50x10 mm, 100x50x15 mm and 100x50x20 mm with 1.6mm and 2.0mm thickness for the ...
متن کاملLateral Torsional Buckling of Steel Thin-Walled Beams with Lateral Restraints
Metal thin-walled members have been widely used in building industry. Usually they are utilized as purlins, girts or ceiling beams. Due to slenderness of thin-walled cross-sections these structural members are prone to stability problems (e.g. flexural buckling, lateral torsional buckling). If buckling is not constructionally prevented their resistance is limited by buckling strength. In practi...
متن کاملDEVELOPMENT OF NEURAL NETWORK MODELS TO ESTIMATE LATERAL-DISTORTIONAL BUCKLING RESISTANCE OF CELLULAR STEEL BEAMS
The lateral-torsional buckling (LTB) strength of cellular steel girders that were subjected to web distortion was rarely examined. Since no formulation has been presented for predicting the capacity of such beams, in the current paper an extensive numerical investigation containing 660 specimens was modeled using finite element analysis (FEA) to consider the ultimate lateral-distortional buckli...
متن کاملTransient thermoelastic analysis of FGM rotating thick cylindrical pressure vessels under arbitrary boundary and initial conditions
Assuming arbitrary boundary and initial conditions, a transient thermo-elastic analysis of a rotating thick cylindrical pressure vessel made of functionally graded material (FGM) subjected to axisymmetric mechanical and transient thermal loads is presented. Time-dependent thermal and mechanical boundary conditions are assumed to act on the boundaries of the vessel. Material properties of the ve...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Structural and Construction Engineering (Transactions of AIJ)
سال: 2019
ISSN: 1340-4202,1881-8153
DOI: 10.3130/aijs.84.73