Elastic recovery of polyamide 6 matrix nanocomposites and their basalt fiber co-reinforced hybrids
نویسندگان
چکیده
منابع مشابه
Effect of Fiber Surface Treatment on Wear Characteristics of Carbon Fiber Reinforced Polyamide 6 Composites
Ozone modification method and air-oxidation were used for the surface treatment of polyacrylonitrile(PAN)-based carbon fiber. The surface characteristics of carbon fibers were characterized by X-ray photoelectron spectroscopy (XPS). The interfacial properties of carbon fiber reinforced polyamide 6 (CF/PA6) composites were investigated by means of the single fiber pull-out tests. As a result...
متن کاملEnhancement of interfacial properties of basalt fiber reinforced nylon 6 matrix composites with silane coupling agents
In this work solution surface treatment was applied for producing basalt fiber reinforced PA6 matrix composites. Beyond scanning electron microscopy, static and dynamic mechanical tests, dynamic mechanical analysis of composites was used for qualifying the interfacial adhesion in a wide temperature range. The loss factor peak height of loss factor is particularly important, because it is in clo...
متن کاملCreep Behavior of Basalt and Glass Fiber Reinforced Epoxy Composites
The creep behavior of basalt fiber reinforced epoxy (BFRE) and glass fiber reinforced epoxy (GFRE) composites was studied through tensile testing at high temperature. To study the effect of reinforcing epoxy, the micro glass powder (MGP) was added at various volume percentage into the epoxy resin in BFRE composites. The initial strain for all the specimens were evaluated and compared with each ...
متن کاملExpandable graphite/polyamide-6 nanocomposites
Polyamide-6 (PA-6)/graphite nanocomposites were prepared by melt blending, using a variety of graphites, including virgin graphite, expandable graphites and expanded graphite. The resulting nanocomposites were characterized by X-ray diffraction, thermogravimetric analysis, cone calorimetry, and tensile mechanical analysis. Nanocomposite formation does occur, as denoted by the nanometre dispersi...
متن کاملAccelerated Heat Aging Study of Phenolic/Basalt Fiber Reinforced Composites
One of the greatest impediments to use polymer-matrix composites is their susceptibility to degradation when exposed to the elevated temperatures and the limited knowledge on the thermal and mechanical properties of these composites at such temperatures. The objective of this study is to evaluate the effects of accelerated heat aging on the tensile properties of the Woven Basalt/Phenolic (WBP) ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: e-Polymers
سال: 2017
ISSN: 1618-7229,2197-4586
DOI: 10.1515/epoly-2016-0310