Electric drive systems with long feeder cables

Electric Field Investigation in MV PILC Cables with Void Defect

Abstract—Worldwide, most PILC MV underground cables in use are approaching the end of their design life; hence, failures are likely to increase. This paper studies the electric field and potential distributions within the PILC insulted cable containing common void-defect. The finite element model of the performance of the belted PILC MV underground cable is presented. The variation of the elect...

HVDC Feeder Solution for Electric Railways

For AC railway power supply systems with a different frequency than the public grid, high-voltage AC (HVAC) transmission lines are common, connected to the catenary by transformers. This paper suggests an alternative design based on an HVDC (High Voltage DC) feeder, which is connected to the catenary by converters. Such an HVDC line would also be appropriate for DC-fed railways and AC-fed railw...

Allocating harmonic emission to MV customers in long feeder systems

Previous work has attempted to find satisfactory methods for the allocation of harmonic current emission MV subsystems containing long feeders. It has been proposed that best use of the network's harmonic absorption capacity is made if the allocated current varies with the inverse square root of the harmonic impedance at the point of connection. It has been shown that an exact solution followin...

Electric Motor Drive with Inverter Output Filter

The paper focuses on some aspects of control and estimation in electric drives with inverter output filters. The filters are used in some industrial drives with pulse width modulated (PWM) inverters. They smoothes the motor supply voltage and current so nearly sinusoidal shapes are obtained. The filters can also limit the bearing current and shaft voltages. Because of the voltage drop and phase...

Power Delivery in Systems with Lossy Cables