Electro-Mechanical Modelling and Load Sway Control of Gantry Cranes (Dept.M)
نویسندگان
چکیده
منابع مشابه
Anti-sway control system for cantilever cranes
A process employing a computer controlled crane system for controlling the motion of a movable trolley from which a load is suspended at a variable hoist length therefrom to meet a selected arbitrary horizontal velocity reference while preventing sway of the load involves the steps of first, determining a lateral acceleration to reduce by a factor of one-half the sway energy contributed by (1) ...
متن کاملAnti-sway control for rotating boom cranes
A process for anti-sway control of a rotating boom or other three-degree-of-freedom crane wherein the load is hoisted, at variable hoist lengths, by a cable suspended from a point that can be moved in space in three dimensions, either freely, or under known constraints. Initial acceleration of the load induces an initial sway to the load. A second lateral acceleration, equal to the first latera...
متن کاملA controller enabling precise positioning and sway reduction in bridge and gantry cranes
Precise manipulation of payloads is difficult with cranes. Oscillation can be induced into the lightly damped system by motion of the bridge or trolley, or from environmental disturbances. To address both sources of oscillation, a combined feedback and input shaping controller is developed. The controller is comprised of three distinct modules. A feedback module detects and compensates for posi...
متن کاملAnti-sway and Motion Planning Control of Overhead Cranes
Overhead cranes are usually operated manually to move heavy loads. Fast and smooth movements of the loads are the main objectives of crane operations. However, both the objectives always contradict with each other, so that it is hard to achieve positioning and swing control simultaneously by using conventional methods. This paper presents the adaptive fuzzy sliding mode controller (AFSMC) to re...
متن کاملSway control method and system for rotary cranes
Methods and apparatuses for reducing the oscillatory motion of rotary crane payloads during operator-commanded or computer-controlled maneuvers. An Input-shaping filter receives input signals from multiple operator input devices and converts them into output signals readable by the crane controller to dampen the payload tangential and radial sway associated with rotation of the jib. The input s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MEJ. Mansoura Engineering Journal
سال: 2020
ISSN: 2735-4202
DOI: 10.21608/bfemu.2020.128990